Polyamide 6.10 with medium viscosity, party from bio-renewable recources. For injection moulding and extrusion applications.

Medium viscosity, heat stabilized product with very good flowability. For different parts of housing parts.

Medium viscosity standard quality with good flow characteristics. For long and short cycle times.

Unfilled Polyamide 6 standard quality, low-viscosity and good flowability. Good for high flow path and short cycle times.

Polyamide without release agent for injection moulding and extrusion. For all kind of moulding parts.

Polyamid without release agent for injection moulding and extrusion. For all kind of moulding parts.

High viscosity Polyamide 6 with heat stabilizer. For Extrusion.

Unreinforced, high viscosity polyamide 6 extrusion grade, modified with 20% PTFE chemically bonded. For extrusion parts with good sliding and wear properties.

Unfilled, high viscosity Polyamide 6. For moulding parts of high crystallisation, stiffness and tensile strength.

Medium viscosity Polyamide 6, 10% glassfiber and 20% glassbeads reinforced. For all kind application with high stiffness and dimensional accuracty, as well as low tendency to warp.

Medium viscosity Polyamide 6, 15% glassbeads reinforced and UV stabilizer For distortion low moulding parts.

30% glass beads reinforced Polyamide 6, good flowability and higher stiffness. Long moulding parts, short cycletime and well balanced shrinkage, good demoulding characteristics.

Medium viscosity PA6, 50% glassfiber reinforced, increased dimensional accuracy, good flowability, good impact resistance and bright natural colour. For dimensionally stable moulding parts, short cycletime, balanced shrinkage characteristics and very low warpage.

Standard type with medium viscosity PA 6 with 30% glass fiber reinforced and UV stabilizer For all kind of injection parts

PA 6 medium viscosity, 30% glassbead reinforced. For parts with long flowpaths, short moulding cycles with balanced shrinkage characteristics.

PA medium viscosity, heat resistant and 30% glassbead reinforced. For low warpage moulding parts with balanced shrinkage characteristics.

Standard type with medium viscosity with 10% glass fiber filled as well as improved flow characteristics For all kind of injection moldings parts with long flow distance

Medium viscosity Polyamide 6, 15% glass fibre reinforced, good impact resistance and heat stabilised. For moulding parts with increased stiffness.

Medium viscosity PA6, 20% glassfiber and 10% glassbead reinforced. For all kind of moulding parts with high stiffness and low tendency to warp.

PA6 Standard type with medium viscosity with 30% glass fiber filled and antimicrobial characteristic For all kind of injection molding parts with antimicrobial characteristic

PA6 medium viscosityk, 30% glassfiber reinforced, halogen-free flame retardants, good flowability, good impact strength and light natural color. For flame retarded moulding parts with high rigidity.

Medium viscosity PA6, 30% glassfiber reinforced and halogen-free flame retardants. For flame retarded moulding parts with high rigidity.

Medium viscosity Polyamide 6, 35% glassfiber reinforced. For moulding parts with very high stiffness and good impact resistance.

Medium viscosity Polyamide 6, 50% glassfiber reinforced. For Molding parts of very high stiffness combined with good impact strength.

Medium viscosity polyamide 6, 60% glassfiber reinforced, good flowability and good impact resistance. For all kind of moulding parts with very high stiffness.

Medium viscosity polyamide 6 with 15% glass fibre. Injection moulding parts with improved stiffness.

PA6, medium viscosity and 20% glassfiber reinforcement. For molded parts with increased rigidity.

25% glassfiber reinforced Polyamide 6, medium-viscosity. Moulding parts with good stiffness.

Medium viscosity Polyamide 6, 30% glassfiber reinforced, good flowability, good impact resistance and bright natural colour. For moulding parts with high stiffness and good impact resistance.

Medium viscosity Polyamide 6, 30% glass fiber reinforced, nanomodified. For moulding parts with high stiffness and good impact resistance.

PA6 standard type with medium viscosity with 30% mineral filler and UV stabilizer. Suitable for laser marking For all kind of injection molding parts

Medium viscosity standard PA6 with 40% mineral filler. For parts with demand to low warpage.

PA6 standard type with medium viscosity with 40% mineral filler For dimensionally stable mold

Polyamide 6, 15% PTFE chemically bonded. For injection moulding parts with increased demand of abrasion and anti-friction properties.

Medium viscosity PA6, 20% PTFE chemically bonded and 20% glassfiber reinforced, good flowability, good impact resistance and bright natural colour. For moulding parts with increased stiffness and slide loading.

Polyamide 6 with 20% PTFE chemically coupled and nano modified For injection moldings parts with increased requirements on abrasion and anti-friction properties

Polyamide 6, 10% glassfiber and 30% mineralfiber reinforced, good flowability and high stiffness. For Injection moulding parts with well balanced shrinkage.

PA6, medium viscosity, 10% glass fibre reinforced For all kind of injection moulded parts with high stiffness.

PA 6 standard type with medium viscosity with 15% glass fiber and 15% glass beads filled For low distortion molding parts

Medium viscosity polyamide 6 with 15% glass fibre reinforcement. For moulding parts with high rigidity.