PA 6.6 low viscosity and good flowability. For long melt flow path and schort cycle time.

PA66 standard type with medium viscosity. For all kind of injection molding parts.

30 % glass beads reinforced Polyamide 6.6, medium viscosity. Warpage-free, accurate dimensionally moulding parts, well balanced shrinkage characteristics.

PA66 standard type with medium viscosity with 10% glass fiber an d 20% glass beads reinforcement For all kind of injection molding parts

30 % glass beads reinforced Polyamide 6.6, impact modified. Accurate dimensionally moulding parts, higher stiffness, well balanced shrinkage behaviour.

30 % glass fibre and glass beads reinforced Polyamide 6.6, medium viscosity. Stiff moulding parts, reduced warpage, balanced shrinkage characteristics.

Medium viscosity PA66, 20% glassfiber and 10 % glassbead reinforced, good flowability and bright natural colour. For long melt flow-way, short moulding cycles and good release properties.

Medium viscosity PA66 with 25% glass fibre reinforcement and halogen free flame retardant. For all kind of moulding parts with high stiffness and reduced flammability.

Standard type with medium viscosity PA66 with 25% reinforced and halogenated flame retardants For all kind of injection molding parts with high stiffness and flame resistant

Medium viscosity standard quality, 25 % glassfiber reinforced, heat stabilized with good flowability, good impact resistance and bright natural colour. For all kind of moulding parts with high stiffness at good thermal stability.

Medium viscosity standard Polyamide 6.6, 30% glass fibre reinforced, good flowability, good impact resistance and heat stabilised. For all kind of moulding parts wirh high stiffness at good heat resistance.

Medium-viscosity standard quality, 30 % glass fiber reinforced, good flowability, good toughness and bright natural colour. For all kind of moulding parts with high stiffness.

Medium viscosity, 35 % glassfiber reinforced Polyamide 6.6, good flowability, good impact strength, bright natural colour, hydrolysis resistant. For moulding parts with high rigidity at good heat resistant.

Medium viscosity PA 6.6 with 35% glass fibre reinforcement. For parts with high stiffness.

Medium viscosity Polyamide 6.6, 50 % glassfiber reinforced, heat stabilized. For moulding parts with high stiffness at good thermal stability.

PA 6.6 medium viscosity, 30 % glass fibre reinforced, halogen-free flame retardants and good flowability. For flame retarded moulding parts with high rigidity.

Medium viscosity standard PA66, 30% glasfiber reinforced, good flowability, heat stabilized and hydrolysis stabilized For all kind of moulding parts with high stiffness at good heat resistance.

Polyamid 66 with 15%PTFE chemically coupled as well as UV stabilisation. For all kind of injection molding parts with increased abrasion resistance and anti-friction properties.

Polyamid 66, 15 % PTFE chemically bonded. For injection moulding parts with increased demand of abrasion and anti-friction properties.

Medium viscosity quality with 30% glass fibre reinforcement as well as 20% PTFE, chemically bonded. For moulding parts with high stiffness and good sliding properties.

Polyamide 66, 20% PTFE chemically bonded, nanomodified. For injection moulding parts with increased Demand of abrasion and anti-friction properties.

Polyamid 66, 20 % PTFE chemically bonded. For injection moulding parts with increased demand of abrasion and anti-friction properties.

Standard quality PA 6.6, medium viscosity, 25% glassfiber reinforced. Moulding parts of high rigidity and good heat resistance.

PA66 standard type with medium viscosity and halogen-containing flame retardants as well as heat and hydrolysis stability For all kind of injection molding parts with high rigidity and heavy flammability

Medium viscosity PA66 with 30% glass fibre reinforcement and hydrolysis stabilisation. Moulding parts of high rigidity and good heat resistance.

PA66 with medium viscosity, 50% glassfiber reinforced and UV resistant For moulding parts with very high stiffness at good thermal stability.

Standard quality PA 6.6, medium viscosity, 30% glassfiber reinforced. Moulding parts of high rigidity and good heat resistance.

Medium viscosity Polyamid 6.6, 15% glassfiber reinforced. For technical moulding parts with high stiffness and dimensional stability.

Medium viscosity industrial quality, 30% glassfiber reinforced, heat and hydrolysis resistant. For moulding parts with high stiffness at good heat stabilisation.

Medium-viscosity 30 % glass fibre reinforced Polyamide 6.6, industrial grade. Stiff moulding parts, good stability at increased temperatures.

Medium viscosity PA 6.6 with 20% glassfiber and 10% glassbead reinforced, good flowability and good impact resistance. For long melt flow path´s, short moulding cycle and good demoldability.

PA66 standard type with medium viscosity with well flowability. For deep flow short cycle time.

Medium viscosity Polyamide 6.6 with good flowability, good impact resistance and bright natural colour. For long flow distances and short molding cycles with good demoldability.

PA66 medium viscosity, flame retardent with good flowability and impact strength. self-extinguishing moulding parts with deep flow, short moulding cycles and good demoldability.

Medium viscosity Polyamide 6.6, good flowability and heat stabilisation. For long moulding parts, short cycletime, good demoulding.

Medium viscosity Polyamide 6.6 with good flowability, good impact resistance, bright natural colour and UV-stabilizer. For long flow distances, short moulding cycles with good demoldability.

Unfilled Polyamide 6.6, good flowability and impact strength. Good for long moulding parts, short cycle times and good demoulding properties.

Medium viscosity Polyamide 6.6 with good flowability, good toughness and heat stabilisation. For long flow paths, short cycle time with good release properties.

Medium viscosity Polyamide 6.6, good flowability, good impact strength. For long moulding parts, short cycletime, good demoulding.

Medium-viscosity, unfilled Polyamide 6.6 industrial grade, good flowability and good impact strength Industrial parts of different kind, good demoulding properties.