PANT D10G35 is a glass fiber reinforced semi-aromatic nylon with good fluidity, high temperature resistance and mechanical properties.

PANT D10G50 is a glass fiber reinforced semi-aromatic nylon with hydrolysis resistance, good fluidity, high torsion and excellent mechanical properties.

PANT D30G30 NHL is a halogen-free flame retardant semi-aromatic nylon with glass fiber reinforced, high temperature resistance, low moisture absorption, low warpage, good fluidity and excellent mechanical properties.

PANT D30G30 is a glass fiber reinforced semi-aromatic nylon with good fluidity, high temperature resistance and mechanical properties.

PANT I10G50 is a glass fiber reinforced semi-aromatic nylon material. It has good hydrolysis resistance, good fluidity, high torsion, good dimensional stability and excellent mechanical properties. Mainly used in medical appliances, plumbing systems, pipes and other applications of plastic instead of metal.

PANT I10G55 is a glass fiber reinforced semi-aromatic nylon material. It has good hydrolysis resistance, good fluidity, high torsion, good dimensional stability and excellent mechanical properties. Mainly used in medical appliances, plumbing systems, pipes and other applications of plastic instead of metal.

PANT I10M40 is a low water absorption, fluidity and mechanical performance of the electroplating class semi aromatic nylon. It can be electroplated by ordinary ABS electroplating line.

PANT I20G50 NHL is a halogen-free flame retardant semi-aromatic nylon with glass fiber reinforced, high rigidity, low moisture absorption, low warpage, good fluidity and excellent mechanical properties.

PANT P10G55 is a 55% glass fiber reinforced partial semi-aromatic nylon material with high modulus, high strength, low water absorption and excellent mechanical properties. Mainly used in water heating systems, pipes and other applications of plastic instead of metal.

PANT P10G60 is a 60% glass fiber reinforced semi-aromatic nylon material with high modulus, high strength, low water absorption and excellent mechanical properties. Mainly used in water heating systems, pipes and other applications of plastic instead of metal.

Glass Fiber Reinforced PPA Compound

This data represents typical values that have been calculated from all products classified as: Generic HPPA - Glass Fiber This information is provided for comparative purposes only.

Kalix® 2330 is a bio-sourced, polyamid-based compound with 30% by weight carbon fiber reinforcement. This material is specifically formulated for high strength and stiffness applications where good impact resistance and excellent dimensional stability after molding are required. Its low viscosity and excellent flow properties make the material ideal for filling parts with thin-walled sections such as those encountered in the mobile electronics industry.

Kalix® 2545 is a bio-sourced polyamide-based material for electronic devices with low dielectric constant. - Black: Kalix® 2545 BK 111

Kalix® 2555 is a bio-sourced, polyamide-based compound with 55% by weight glass reinforcement. This material is specifically formulated for high strength and stiffness applications where good impact resistance, outstanding dielectric properties, and excellent dimensional stability after molding are required. Its low viscosity and excellent flow properties make the material ideal for filling parts with thin-walled sections such as those encountered in the mobile electronics industry. - Black: Kalix® 2555 BK 999

Kalix® 2555 is a bio-sourced, polyamide-based compound with 55% by weight glass reinforcement. This material is specifically formulated for high strength and stiffness applications where good impact resistance, outstanding dielectric properties, and excellent dimensional stability after molding are required. Its low viscosity and excellent flow properties make the material ideal for filling parts with thin-walled sections such as those encountered in the mobile electronics industry. - Natural: Kalix® 2555 NT 000 - Black: Kalix® 2555 BK 000

Kalix® 2855 is a bio-sourced, polyamide-based compound with 55% by weight glass fiber reinforcement. This material is formulated to provide maximum strength, stiffness, impact resistance, and post-mold dimensional stability in thermoplastic parts. Its low viscosity and excellent flow properties make the material ideal for filling parts with thin-walled sections such as those encountered in the mobile electronics industry. - Black: Kalix® 2855 BK 000 - White: Kalix® 2855 WH 000

Kalix® 2930 HFFR is a bio-sourced polyamide-based material specifically formulated to meet UL 94V2 @ 0.4 mm requirements for electronic devices. The material uses an advanced halogen-free flame retardant package expressly designed to minimize blooming, plate out, and other process related issues commonly associated with flame retardant materials. - Black: Kalix® 2930 HFFR BK 000

Kalix® 2940 is a bio-sourced, polyamide-based compound with 40% by weight glass fiber reinforcement. This material is specifically formulated for high strength and stiffness applications where good impact resistance and excellent dimensional stability after molding are required. The formulation also addresses warpage issues associated with the anisotropic shrinkage of glass fiber reinforced materials so that close tolerance molding is more easily achieved. Its low viscosity and excellent flow properties make the material ideal for filling parts with thin-walled sections such as those encountered in the mobile electronics industry.

Kalix® 2955 is a bio-sourced, polyamide-based compound with 55% by weight glass fiber reinforcement. This material is specifically formulated for high strength and stiffness applications where good impact resistance and excellent dimensional stability after molding are required. The formulation also addresses warpage issues associated with the anisotropic shrinkage of glass fiber reinforced materials so that close tolerance molding is more easily achieved. Its low viscosity and excellent flow properties make the material ideal for filling parts with thin-walled sections such as those encountered in the mobile electronics industry. - Black: Kalix® 2955 BK 000 - White: Kalix® 2955 WH 000

Kalix® 5950 HFFR is a halogen-free, flame retardant (UL-94 V0 at 0.4 mm), highly reinforced polyamide material specifically formulated for high strength and stiffness applications where good impact resistance and excellent dimensional stability after molding are required. The formulation also addresses warpage issues associated with the anisotropic shrinkage of glass fiber reinforced materials so that close tolerance molding is more easily achieved. Its low viscosity and excellent flow properties make the material ideal for filling parts with thin-walled sections such as those encountered in the mobile electronics industry. - Black: Kalix® 5950 BK 000 HFFR - White: Kalix® 5950 WH 000 HFFR - White: Kalix® 5950 WH 001 HFFR - White: Kalix® 5950 WH 008 HFFR

Kalix® 7650 is a high-performance polyamide based material for electronic devices with high flow and low warpage. - Black: Kalix® 7650 BK 000

Kalix® 9850 is a 50% glass-fiber reinforced high-performance polyamide. It is hot-water moldable and intended for use in components requiring superior mechanical properties and excellent surface quality. Kalix® 9850 is characterized by high stiffness and strength, very good impact properties, good dimensional stability, and excellent surface finish. Kalix® 9850 exhibits an excellent combination of high flow, low flash tendency and fast cycle time which makes it a cost-competitive option for thin-walled parts produced in large quantities, such as structural parts in mobile electronic devices. - Black: Kalix® 9850 BK 000

Kalix® 9945 HFFR is a 45% glass-fiber reinforced, halogen-free flame retardant High Performance Polyamide. It is hot-water moldable and intended for use in components requiring superior mechanical properties, excellent surface quality and excellent flammability rating. - Black: Kalix® 9945 BK000 HFFR

Kalix® 9950 is a 50% glass-fiber reinforced high-performance polyamide. It is hot-water moldable and intended for use in components requiring superior mechanical properties and excellent surface quality. Kalix® 9950 is characterized by high stiffness and strength, very good impact properties, good dimensional stability, low warpage behavior and excellent surface finish. It can be successfully plated, for example with non conductive vacuum metallization, or painted with soft touch or UV top coat paints. Please contact your Syensqo sales representative for more information on suitable plating and painting systems. Kalix® 9950 exhibits an excellent combination of high flow, low flash tendency and fast cycle time which makes it a cost-competitive option for thin-walled parts produced in large quantities, such as structural parts in mobile electronic devices. - Black: Kalix® 9950 BK 000 - White: Kalix® 9950 WH 002 - White: Kalix® 9950 WH 003 - Natural: Kalix® 9950 NT 000

Kalix® r9155 is a glass-fiber reinforced high performance polyamide with an average of 91% wt recycled content for the entire material consisting of 34.4% PIR/PCR and 56.4% PIR allocated on a mass-balance basis*. It is hot-water moldable and intended for use in components requiring superior mechanical properties and excellent surface quality. Kalix® r9155 is characterized by high stiffness and strength, very good impact properties, good dimensional stability, low warpage behavior and excellent surface finish. It can be successfully plated, for example with non conductive vacuum metallization, or painted with soft touch or UV top coat paints. Please contact your Syensqo sales representative for more information on suitable plating and painting systems. *Notes: (1) The data was calculated consistent with the international standard for Environmental Labels and Declarations/Self-Declared Environmental Claims, ISO 14021:2016, using a proportion, by mass, of recycled material in a product (without packaging), while only pre-consumer and post-consumer materials were considered as recycled content, also consistent with the standard’s usage of terms. (2) This information is provided in good faith and is believed accurate as of the date of this document based on a review of recent composition data and information supplied by the vendors. The information and the results hereinabove are provided “as is”, at the discretion of the disclosing company, without guarantee, warranty or representation of any kind, express or implied, including but not limited to, as to (i) their accuracy or completeness, (ii) their fitness for a particular purpose and non infringement of third parties’ intellectual property rights, and (iii) their use. The Syensqo Group companies shall incur no liabilities in connection with the foregoing. According to ISO 14021 standards, the use of environmental claims to support comparative assertions intended to be disclosed raises special concerns and requires specific critical review.

SVPx-129 Novadyn ® DT/DI is a medium viscosity, semi-aromatic PA copolymer of DT/DI. Novadyn™ high performance polyamide provides excellent transparency, chemical resistance and a higher Tg than traditional polyamides of 6I/6T. Applications include clear molded parts, compounds for metal replacement, additives for fiber property enhancement, films and reducing the moisture effect in traditional nylon molded parts . Application Examples: - Injection Molding - Compounding - Functional Additives

Omnix® 4020 is a 20% glass-fiber reinforced, heat-stabilized, high-performance polyamide (HPPA). It is particularly suited for replacing die-cast metal in a variety of mechanical applications and components used in automotive, consumer goods, E/E, and construction. Components injection molded from Omnix® 4020 display exceptional mechanical properties and excellent surface appearance even after moisture adsorption. - Black: Omnix® 4020 BK 000

Omnix® 4030 is a 30% glass-fiber reinforced, heat-stabilized, high-performance polyamide (HPPA). It is particularly suited for replacing die-cast metal in a variety of mechanical applications and components used in automotive, consumer goods, E/E, and construction. Components injection molded from Omnix® 4030 display exceptional mechanical properties and excellent surface appearance even after moisture adsorption. - Black: Omnix® 4030 BK 000 - Natural: Omnix® 4030 NT 000

Omnix® 4050 is a 50% glass-fiber reinforced, high-performance polyamide (HPPA). It is particularly suited for replacing die-cast metal in a variety of mechanical applications and components used in automotive, consumer goods, E/E, and construction. Components injection molded from Omnix® 4050 display exceptional mechanical properties and excellent surface appearance even after moisture adsorption. - Black: Omnix® 4050 BK 000 - Natural: Omnix® 4050 NT 000

Omnix® 9050 is a 50% glass-fiber reinforced high-performance polyamide. It is hot-water moldable and intended for use in components requiring superior mechanical properties even after moisture absorption. Omnix® 9050 is characterized by high stiffness and strength, very good impact properties, good dimensional stability and high flow properties. This material is an economical alternative to die-cast alloys for application in automotive, electrical appliance and mechanical equipment. It processes readily using conventional injection molding machines and methods. Water-cooled molds are suitable for use with this grade. - Black: Omnix® 9050 BK 000 - Natural: Omnix® 9050 NT 000

Omnix® DW-4050 is a 50% glass-fiber reinforced high-performance polyamide. It is hot-water moldable and intended for use in components requiring superior mechanical properties even after moisture absorption. Omnix® DW-4050 is characterized by high stiffness and strength, very good impact properties, good dimensional stability and high flow properties. This material is an economical alternative for drinking and potable water. Omnix® DW-4050 is approved for use in potable water in France, Germany, United States and United Kingdom. It processes readily using conventional injection molding machines and methods. Water-cooled molds are suitable for use with this grade. - Black: Omnix® DW-4050 BK 001 - Natural: Omnix® DW-4050 NT 000

Omnix® FC-4050 is a 50% glass-fiber reinforced high-performance polyamide. It is hot-water moldable and intended for use in components requiring superior mechanical properties even after moisture absorption. Omnix® FC-4050 is characterized by high stiffness and strength, very good impact properties, good dimensional stability and high flow properties. This material is an economical alternative for food service applications using die-cast alloys. Omnix® FC-4050 is cleared for use under United States Food and Drug Administration (FDA) Conditions of Use B through H, in contact with all food types except Food Type VI C, Beverages containing more than 8 percent alcohol. Omnix® FC-4050 is also cleared for food contact use by European Union regulations. For specific clearances, please contact your Syensqo representative. It processes readily using conventional injection molding machines and methods. Water-cooled molds are suitable for use with this grade. - Natural: Omnix® FC-4050 NT 000 - Black: Omnix® FC-4050 BK 001

Omnix® FC-9050 is a 50% glass-fiber reinforced high-performance polyamide. It is hot-water moldable and intended for use in components requiring superior mechanical properties even after moisture absorption. Omnix® FC-9050 is characterized by high stiffness and strength, very good impact properties, good dimensional stability and high flow properties. This material is an economical alternative for food service applications using die-cast alloys. Omnix® FC-9050 is approved for food contact and meets FDA regulations for Omnix® FC-9050 NT 000 (natural) and Omnix® FC-9050 BK 000 (black) based on clearances granted by FCN 001242 for repeated use food contact applications with all food types, under FDA conditions of use B through H as described in Tables 1 and 2 of 21 CFR 176.170(c). It processes readily using conventional injection molding machines and methods. Water-cooled molds are suitable for use with this grade. - Black: Omnix® FC-9050 BK 000 - Natural: Omnix® FC-9050 NT 000

GF-reinforced; Weather Resistant

GF-reinforced; Weather Resistant; HB equivalent per in-house testing

GF-reinforced; Warpage, Low; Rigidity, High

GF-reinforced; Abrasion Resistant

GF-reinforced; Abrasion Resistant

Carbon Fiber-reinforced; Abrasion Resistant; HB equivalent per in-house testing