UV detectable grade with good flow for medical technology applications Hostaform® MT®8U05 is an injection molding grade with a molecular weight for excellent moldability and optimum properties in demanding applications. The material can be identified by UV detectors. Hostaform®Â MT®8U05 is a special grade developed for medical industry applications and complies with: CFR 21 (177.2470) of the Food and Drug Administration (FDA) and is listed in the Drug Master File (DMF 11559) and the Device Master File (MAF 1079) the corresponding EU and national registry regulatory requirements biocompatibility in tests corresponding to USP Class VI/ISO 10993 low residual monomers no animal-derived constituents

Hostaform® POM RF 2162 is an impact modified acetal copolymer that has been specially designed for Rotomolding. The material is UV stabilized and is available in precolored black or natural. Hostaform® POM RF 2162 has low fuel permeation and meets CARB and EPA regulations as a single layer solution.

Hostaform® POM RF2464 is an impact modified acetal copolymer that has been specially designed for Rotomolding. The material is UV stabilized and is available in natural or can be supplied in a pre-colored black. Hostaform® POM RF2464 has excellent toughness balanced wtih low fuel permeation and meets EPA and CARB regulations as a single layer solution in fuel tanks.

Easy flowing elastomer-containing injection molding grade, moderate toughness Chemical abbreviation according to ISO 1043-1: POM-HI, Molding compound ISO 29988- POM-K, M-GNPR, 05-001 POM copolymer, modified Easy flowing elastomer-containing injection molding type based on HOSTAFORM® C 27021; with higher impact strength and slightly lower hardness, rigidity and chemical resistance than the basic type; high resistance to thermal and oxidative degradation. UL-registration in natural and a thickness more than 1.57 mm as UL 94 HB. Burning rate ISO 3795 and FMVSS 302 < 100 mm/min for a thickness more than 1 mm thickness. Ranges of applications: For thin-walled molded parts with higher energy-absorbing capacity UL = Underwriters Laboratories (USA) FMVSS = Federal Motor Vehicle Safety Standard (USA). ECO-B: Hostaform ECO-B is a POM-Copolymer with the same properties and performance as standard grades but produced with sustainability in mind. Using a mass-balance approach, biogenic feedstocks are used to offset the use of fossil-based raw materials and decrease greenhouse gas emissions. The process is audited and certified according to the ISCC Plus mass balance approach.

Easy flowing elastomer-containing injection molding grade; moderate toughness Chemical abbreviation according to ISO 1043-1: POM-HI, Molding compound ISO 29988- POM-K, M-GNPR, 05-001 POM copolymer, modified Easy flowing elastomer-containing injection molding type based on HOSTAFORM® C 27021; with higher impact strength and slightly lower hardness, rigidity and chemical resistance than the basic type; high resistance to thermal and oxidative degradation. UL-registration in natural and a thickness more than 1.57 mm as UL 94 HB. Burning rate ISO 3795 and FMVSS 302 < 100 mm/min for a thickness more than 1 mm thickness. Ranges of applications: For thin-walled molded parts with higher energy-absorbing capacity UL = Underwriters Laboratories (USA) FMVSS = Federal Motor Vehicle Safety Standard (USA)

Impact modified, low emission Polyacetal copolymer, impact modified Easy flowing, elastomer-containing injection molding type based on HOSTAFORM® C 27021 with high toughness and reduced emissions HB. Burning rate ISO 3795 and FMVSS 302 < 100 mm/min for more than 1 mm thickness. Emission according to VDA 275

Easy flowing; elastomer-containing injection molding grade; high toughness Chemical abbreviation according to ISO 1043-1: POM-HI Molding compound ISO 29988- POM-K, M-GNPR, 05-001 POM copolymer, modified Easy flowing, elastomer-containing injection molding type based on HOSTAFORM® C 27021 with high toughness, and slightly lower hardness, rigidity and chemical resistance than the basic type; high resistance to thermal and oxidative degradation. UL-registration in natural and a thickness more than 1.57 mm as UL 94 HB. Burning rate ISO 3795 and FMVSS 302 < 100 mm/min for a thickness more than 1 mm thickness. Ranges of applications: For thin-walled molded parts with high energy-absorbing capacity. UL = Underwriters Laboratories (USA) FMVSS = Federal Motor Vehicle Safety Standard (USA)

Easy flowing; elastomer-containing injection molding grade; black; weathering resistant Chemical abbreviation according to ISO 1043-1: POM-HI Molding compound ISO 29988- POM-K, M-GCLP, 05-001 Modified POM copolymer Easy flowing, elastomer-containing injection molding type in color modifying black 10/1570; especially weathering resistant; lower chemical resistance than the basic type HOSTAFORM® C 27021; high resistance to thermal and oxidative degradation. Burning rate ISO 3795 and FMVSS 302 < 100 mm/min for a thickness more than 1 mm. Ranges of applications: for molded parts with matt surface. FMVSS = Federal Motor Vehicle Safety Standard (USA)

Impact modified, low emission Easy flow, impact modified injection molding grade, with good low temperature impact strength and good weld line strength and reduced emissions. Emission according to VDA 275 < 5 mg/kg

Impact Modified, low Emission Easy flow, high impact modified injection molding grade, with good low temperature impact strength and good weld line strength and reduced emissions. Emission according to VDA 275 < 5 mg/kg Preliminary data sheet

Impact modified, low emission POM copolymer, modified Injection molding type, elastomer-containing; with higher impact strength and slightly lower hardness, rigidity and chemical resistance than the basic type HOSTAFORM® C 9021 Reduced emission grade, Emission according to VDA 275 < 5 mg/kg good weld strength. Burning rate according to FMVSS 302 < 100 mm/min (1 mm thickness) Preliminary Datasheet ECO-B: Hostaform ECO-B is a POM-Copolymer with the same properties and performance as standard grades but produced with sustainability in mind. Using a mass-balance approach, biogenic feedstocks are used to offset the use of fossil-based raw materials and decrease greenhouse gas emissions. The process is audited and certified according to the ISCC Plus mass balance approach.

Impact modified, UV stabilized POM copolymer, modified Injection molding type, elastomer-containing; with higher impact strength and slightly lower hardness, rigidity and chemical resistance than the basic type HOSTAFORM® C 9021 Reduced emission grade, Emission according to VDA 275 < 5 mg/kg good weld strength. Burning rate according to FMVSS 302 < 100 mm/min (1 mm thickness) Preliminary Datasheet for natural and colored grades

Impact modified, low emission POM copolymer, modified Injection molding type, elastomer-containing; with higher impact strength and slightly lower hardness, rigidity and chemical resistance than the basic type HOSTAFORM® C 9021 Reduced emission grade, Emission according to VDA 275 < 5 mg/kg good weld strength. Burning rate according to FMVSS 302 < 100 mm/min (1 mm thickness) Preliminary Datasheet

Impact Modified, UV-stabilized POM copolymer, modified Injection molding type, elastomer-containing; with higher impact strength and slightly lower hardness, rigidity and chemical resistance than the basic type HOSTAFORM® C 9021 Reduced emission grade, Emission according to VDA 275 < 5 mg/kg good weld strength. Preliminary Datasheet for natural and colored grades

High impact modified, low emission POM copolymer, modified Injection molding type, elastomer-containing; with higher impact strength and slightly lower hardness, rigidity and chemical resistance than the basic type HOSTAFORM® C 9021 Reduced emission grade, Emission according to VDA 275 < 5 mg/kg good weld strength. Preliminary Datasheet

Impact modified, improved modulus and weld line, low emission Hostaform® acetal copolymer grade S 9362 XAP®2 is an impact modified grade for applications requiring improved impact. Hostaform® S 9362 XAP®2 provides good impact strength while improving modulus and weld line strength over standard impact modified grades such as Hostaform® S 9063, and also exhibits exceptional low emission performance meeting or exceeding the requirements of many automotive markets. Chemical abbreviation according to ISO 1043-1: POM-HI. ECO-B: Hostaform ECO-B is a POM-Copolymer with the same properties and performance as standard grades but produced with sustainability in mind. Using a mass-balance approach, biogenic feedstocks are used to offset the use of fossil-based raw materials and decrease greenhouse gas emissions. The process is audited and certified according to the ISCC Plus mass balance approach.

Impact modified, improved modulus and weld line, low emission Hostaform® acetal copolymer grade S 9362 XAP®2 is an impact modified grade for applications requiring improved impact. Hostaform® S 9362 XAP®2 provides good impact strength while improving modulus and weld line strength over standard impact modified grades such as Hostaform® S 9063, and also exhibits exceptional low emission performance meeting or exceeding the requirements of many automotive markets. Chemical abbreviation according to ISO 1043-1: POM-HI

Impact modified, improved modulus and weld line Hostaform® acetal copolymer grade S 9362 is an impact modified grade for applications requiring improved impact. Hostaform® S 9362 provides good impact strength while improving modulus and weld line strength over standard impact modified grades such as Hostaform® S 9063. Chemical abbreviation according to ISO 1043-1: POM-HI

Impact modified, improved modulus and weld line, low emission Hostaform® acetal copolymer grade S 9363 XAP®2 is an impact modified grade for demanding applications. Hostaform® S 9363 XAP®2 provides good impact strength while improving modulus and weld line strength over standard impact modified grades such as Hostaform® S 9063, and also exhibits exceptional low emission performance meeting or exceeding the requirements of many automotive markets. Chemical abbreviation according to ISO 1043-1: POM-HI ECO-B: Hostaform ECO-B is a POM-Copolymer with the same properties and performance as standard grades but produced with sustainability in mind. Using a mass-balance approach, biogenic feedstocks are used to offset the use of fossil-based raw materials and decrease greenhouse gas emissions. The process is audited and certified according to the ISCC Plus mass balance approach.

Impact modified, improved modulus and weld line, low emission Hostaform® acetal copolymer grade S 9363 XAP®2 is an impact modified grade for demanding applications. Hostaform® S 9363 XAP®2 provides good impact strength while improving modulus and weld line strength over standard impact modified grades such as Hostaform® S 9063, and also exhibits exceptional low emission performance meeting or exceeding the requirements of many automotive markets. Chemical abbreviation according to ISO 1043-1: POM-HI

Impact modified, improved modulus and weld line Hostaform® acetal copolymer grade S 9363 is an impact modified grade for demanding applications. Hostaform® S 9363 provides good impact strength while improving modulus and weld line strength over standard impact modified grades such as Hostaform® S 9362. Chemical abbreviation according to ISO 1043-1: POM-HI

Low permeation impact modified grade for blow molding Hostaform® acetal copolymer grade S 9364LPB is a highly impact modified grade for low permeation. Hostaform® S 9364LPB provides a significant improvement in impact strength and flexibility over standard impact modified grades. Chemical abbreviation according to ISO 1043-1: POM-HI

Impact modified, weatherable Hostaform® acetal copolymer grade S 9364 WS 10/1570 is a highly impact modified grade for demanding applications that also need improved resistance to UV exposure. Besides weatherability, Hostaform® S 9364 WS 10/1570 provides a significant improvement in impact strength and flexibility over standard impact modified grades such as Hostaform® S 9362 and S 9363. This grade is only available in black. Chemical abbreviation according to ISO 1043-1: POM-HI

Impact modified, improved modulus and weld line, low emission Hostaform® acetal copolymer grade S 9364 XAP®2 is a highly impact modified grade for demanding applications. Hostaform® S 9364 XAP®2 provides a significant improvement in impact strength and flexibility over standard impact modified grades such as Hostaform® S 9362 and S 9364, and also exhibits exceptional low emission performance meeting or exceeding the requirements of many automotive markets. Chemical abbreviation according to ISO 1043-1: POM-HI ECO-B: Hostaform ECO-B is a POM-Copolymer with the same properties and performance as standard grades but produced with sustainability in mind. Using a mass-balance approach, biogenic feedstocks are used to offset the use of fossil-based raw materials and decrease greenhouse gas emissions. The process is audited and certified according to the ISCC Plus mass balance approach.

Impact modified, improved modulus and weld line, low emission Hostaform® acetal copolymer grade S 9364 XAP®2 is a highly impact modified grade for demanding applications. Hostaform® S 9364 XAP®2 provides a significant improvement in impact strength and flexibility over standard impact modified grades such as Hostaform® S 9362 and S 9364, and also exhibits exceptional low emission performance meeting or exceeding the requirements of many automotive markets. Chemical abbreviation according to ISO 1043-1: POM-HI

high performance impact modified Hostaform® acetal copolymer grade S 9364 is highly impact modified grade for demanding applications. Hostaform® S 9364 provides a significant improvement in impact strength and flexibility over standard impact modified grades such as Hostaform® S 9362 and S 9363. Chemical abbreviation according to ISO 1043-1: POM-HI

Impact modified, UV resistant grade Hostaform® acetal copolymer grade S 9364UV is a highly impact modified grade for demanding applications. Hostaform® S 9364UV provides a significant improvement in impact strength and flexibility over prior generation impact modified grades such as Hostaform® S 9063 and S 9064. Hostaform® S 9364UV is not designed for the typical UV resistance requirements of interior and exterior automotive applications.

POM, Tribology POM copolymer Injection molding grade with tribological modification for demanding applications that require prevention of audible noise caused by stick-slip phenomenon. Excellent tribological performance with low friction and low wear under various conditions of sliding against plastics and metals. Reduced emission grade. Emissions according to VDA 275 < 5 mg/kg. Chemical abbreviation according to ISO 1043-1: POM Molding compound ISO 29988-1: POM-K | M-GNRS2 | 5-2 | - | POM copolymer

POM, Tribology POM copolymer Injection molding grade with tribological modification for demanding applications that require prevention of audible noise caused by stick-slip phenomenon. Excellent tribological performance with low friction and low wear under various conditions of sliding against plastics and metals. Reduced emission grade. Emissions according to VDA 275 < 5 mg/kg.  Material is also food contact compliant in certain countries and for certain conditions of use (contact Celanese for further information). Chemical abbreviation according to ISO 1043-1: POM Molding compound ISO 29988-1: POM-K | M-GNRS2 | 4-2 | - | POM copolymer

Hostaform® SX90 is an integrally colored SpeciaLX nominal 9 melt flow rate based acetal copolymer material. This grade provides a unique part appearance while retaining the mechanical performance expected from unfilled acetal copolymer grades.

Special effect UV colors, low emission Hostaform® SX90Z XAP® is an integrally colored SpeciaLX nominal 9 melt flow rate based acetal copolymer material stabilized for use where ultraviolet radiation exposure is to be encountered. The material is formulated to prevent discoloration, fading, chalking and mechanical property change in severe ultraviolet exposure. This product is formulated for the interior automotive market and other applications. Reduced emission grade. Emissions according to VDA 275 < 10 mg/kg

Special effect UV colors, low emission Hostaform® SX90Z XAP®2Â is an integrally colored SpeciaLX nominal 9 melt flow rate based acetal copolymer material stabilized for use where ultraviolet radiation exposure is to be encountered. The material is formulated to prevent discoloration, fading, chalking and mechanical property change in severe ultraviolet exposure. This product is formulated for the interior automotive market and other applications. Reduced emission grade. Emissions according to VDA 275 < 5 mg/kg

Impact modified, UV resistant grade Hostaform® acetal copolymer grade SXT90Z-01 XAP® is a UV stabilized, impact modified material available in a range of colors for automotive interior applications, while also meeting the typical low emission requirements of the automotive market. Chemical abbreviation according to ISO 1043-1: POM-HI Low emission performance (VDA 275) < 10 ppm

Impact modified, UV resistant, Reduced emissions Hostaform® acetal copolymer grade SXT90Z-02 XAP® is a UV stabilized, impact modified material available in a range of colors for automotive interior applications, while also meeting the typical low emission requirements of the automotive market. Chemical abbreviation according to ISO 1043-1: POM-HI Low emission performance (VDA 275) < 10 ppm

Improved flow, low emission, impact modified Hostaform® acetal copolymer TF-10 XAP® is a low emission, improved flow, impact modified grade providing optimum performance in general purpose injection molding, primarily for the interior automotive market. This grade provides overall excellent performance with improved impact in many applications.

UV resistant - automotive, low gloss surface, broad range of colors Hostaform® acetal copolymer grade UV140LG XAP® is a specialty grade of acetal copolymer formulated to provide good flow with a low gloss finish and a UV stability necessary for interior automotive applications. In addition, Hostaform® UV140LG XAP® exhibits low emissions for automotive interiors. Low emission Performance [VDA 275]

UV resistant and low emission - automotive, improved toughness HOSTAFORM® UV25Z XAP2 is a nominal 2.5 melt flow rate acetal copolymer which has been specially stabilized to prevent discoloration and deterioration of mechanical properties from ultraviolet light exposure. The material is available in precolored black or colors, with reduced emissions especially for automotive interior application. Emission according to VDA 275 < 5 mg/kg (natural grades) Emission according to VDA 275 < 5 mg/kg (colored grades).

UV resistance, high flow, low emission Hostaform® acetal copolymer grade UV270Z XAP®2 is a UV stabilized material available in a range of colors generally for automotive interior applications. In addition, Hostaform® UV270 XAP®2 has lower emissions as required for some automotive interiors. Low Emission Performance [VDA-275]

UV resistance, low emission Hostaform® acetal copolymer grade UV90Z XAP®2 is a UV stabilized material available in a range of colors generally for automotive interior applications. In addition, Hostaform® UV90Z XAP®2 has lower emissions as required for some automotive interiors. Low Emission Performance [VDA-275]

High strength glass coupled, easy flow Hostaform® XGC10 EF XAP®2 is an easy flowing injection molding grade reinforced with approximately 10%Â glass fibers, and has reduced emissions. Emissions according to VDA 275 < 5 ppm [mg/kg].