MFE-10 is a bisphenol-A epoxy vinyl ester resin with low styrene emission Property - Suitable viscosity, excellent infiltration with glass fiber. - Low styrene content - Excellent chemical resistance. - Heat distortion temperature of casting is 130°C Application - Special for the molding processes of thermal curing FRP such as pultrusion, filament winding, etc - Used to cementation or repairing material for concrete structure.

MFE-11 is a bisphenol-A epoxy vinyl ester resin with high performance and excellent corrosion resistance. PROPERTIES - Moderate viscosity, effectively wet out with glass fiber - Good air drying, surface drying in 45 min - Excellent corrosion resistance, especially to alkali. - Low peak exotherm, low shrinkage, superior toughness. Do not crack when making thick parts. - Lloyd's Registered. - Complies with FDA regulation 21 CFR 177.2420, when properly formulated and cured, for repeated use in food contact materials. APPLICATION - Chemical storage tank, pipeline, cabin and the jointing material of integral anti-corrosive resin-mortar flooring, granite and anti-proof brick, etc. - Liner and flake of FRP protective surface of metal or concrete structure. - Can be used in hand lay-up, pultrusion, spray up and filament winding process.

MFE-2 is a bisphenol-A epoxy vinyl ester resin, offering excellent general properties, mechanical properties and corrosion resistance. PROPERTY - Reliable process performance. - Better resistance against acid and alkali. - Lloyd's Registered. - Complies with FDA regulation 21 CFR 177.2420, when properly formulated and cured, for repeated use in food contact materials. APPLICATION - Various types of anti-corrosive FRP products, chemical tank, pipe, marine/yachts, etc. - Used in FRP protective surface of metallic or concrete structure - Used as the jointing material of integral anti-corrosive resin-mortar flooring, granite and anti-proof brick, etc - Can be used in filament winding, pultrusion, hand lay-up and spray-up process.

MFE-22 Bisphenol-A Epoxy vinyl ester resin has superior thermal resistance. PROPERTY - Heat Deflection Temperature 20°C higher than MFE-2 - Corrosion resistance similar to MFE-2 - Exceptional wettability APPLICATION - FRP tank, vessel, duct, molded grating, pultruded products and pipeline, etc.

MFE-30 is a high performance bisphenol-A epoxy vinyl ester resin and has excellent corrosion resistant property. PROPERTY - Excellent process performance and wet-out with fiber. - Excellent corrosion resistant especially to inorganic acid, alkali and salt. - Excellent mechanical properties, especially resistance to dynamic load. - Low peak exotherm, low shrinkage. APPLICATION - Various FRP products, especially thick parts. - Can be used in various processes, such as filament winding, pultrusion, spray up, hand lay-up, etc - Applied in engineering projects, such as integral resin mortar flooring, sewing materials, protection layer of metal and concrete structures, etc.

MFE-36 is based on bisphenol-A epoxy vinyl ester resin, modified by methacrylic acid. It has excellent flexibility. PROPERTY - Excellent process performance and wet-out with fibers. - Excellent corrosion-resistance, especially to inorganic acid, alkali, salt, etc. - Excellent mechanical properties. - High tensile elongation. - Low peak exotherm, low shrinkage. APPLICATION - Can be used in various processes, such as hand lay-up, pultrusion, spray-up, filament winding, etc - Various FRP products. - Corrosion resistant flooring, sealing material, FRP layer on the surface of metal and concrete structure.

MFE-4 which modified by HET acid (1'4'5'6'7'7-hexachlorobicyclo(2'2'1)-5-heptene-2'3-dicarboxylic acid), is a special chlorine resistant vinyl ester resin. PROPERTY HET acid in molecular structure protects the ester group, which largely increases the resin's corrosion resistance, especially to Cl 2 and various acids. Besides, the HET acid structure contains two five-membered rings, which makes MFE-4 has good thermal stability, fire-retardancy and chemical resistance. APPLICATION - Various integral anti-corrosion FRP products, such as pipes, tank truck, scrubber, etc. - Special for FRP equipment of ClO 2 bleaching system in paper and pulp industry, lining of bricks. Can be used as daub resin. - Special for covers of electrolytic cells in chlorine-alkali industry.

MFE-5 is acrylic acid type vinyl ester resin modified with isocyanate. Compared with 3201 and 3202, MFE-5 has better corrosion resistance and mechanical properties. PROPERTY - Good water-proof and acid-, alkali-resistance - High tenacity and low shrinkage, good mechanical function - Good air drying. Can be used as surface coating - Long-term service temperature is 90? APPLICATION - Various anti-corrosion FRP products - Used in FRP protective linings or surface coating - Can be used in hand lay-up, pultrusion and filament winding process

MFE-7 is a bromated bisphenol-A epoxy vinyl ester with excellent fire retardancy. Both filled and non-filled fire-retardant epoxy vinyl ester resins are available based on MFE-7 resin. PROPERTY - Excellent anticorrosion performance and mechanical function - The oxygen index of FRP mixed with 3-5% Sb2O3 up to 40 - Both casting and laminate meet ASTM E-84 Flame Spread "Class 1" rating. - Good air drying APPLICATION - Used in manufacturing fire-retardant and anti-corrosive FRP products and linings, also in surface coatings

MFE-9 Vinyl Ester Resin is a rubber modified resin with high toughness, and based on Bisphenol-A epoxy vinyl ester resin. PROPERTY - Low solid contractibility, high toughness, high ductility - Excellent fatigue resistance, impact resistance and cleavage resistance - Excellent adhesion and abrasion resistance, excellent impact strength. - Excellent penetration-proof and hermetically seal. APPLICATION - Used in making flooring, daubing material, sealing material and interface layer of FRP lining - Used in manufacturing helmet for aviation, automobile race and military use, short sled, sailing boat and high performance racing boat - Excellent adhesion, can be used for special tackiness agent - Used with fiber and other reinforced materials, give excellent strength and fatigue resistance property to lamination

W2-3 made by ECUST is a kind of Novolac epoxy vinyl ester resin. It has excellent anticorrosion and high temperature resistance, also has excellent qualities. PROPERTY - High heat-resistance, heat distortion temperature for casting is 145°C and for FRP is 210°C - Excellent anti-corrosion, superior stability to some solvents and oxidizing media APPLICATION - Used in various types of anti-corrosive FRP products and linings with the needs of heat resistance - Used as the jointing material, resin mortar, and special adhesive with chemical resistance - Used as anti-corrosion FRP lining for the surface of metal or concrete. - Used for the technical processes of FRP molding, such as pultrusion, winding, spray, hand lay- up, etc.

MFE-W3 is a novolac-based epoxy vinyl ester resin. It offers corrosion resistance at higher temperatures. PROPERTY - High heat-resistance, heat distortion temperature of casting is 150°C and for FRP is 210°C. - Excellent anti-corrosion and superior stability to some solvents and oxidizing media. - Complies with FDA regulation 21 CFR 177.2420, when properly formulated and cured, for repeated use in food contact materials. APPLICATION - Various corrosion resistant FRP products, such as chemical tank, pipe, served at elevated temperatures. - Used as the jointing material, resin mortar and special adhesive with chemical resistance. - Used as anti-corrosion FRP lining for the surface of metal or concrete. - Can be used in pultrusion, filament winding, spray up and hand lay- up process.