WHITE EPOXY SURFACE COAT TC-1570 A/B is a general-purpose white epoxy surface coat that can be used in conjunction with epoxy or polyurethane resin systems. TC-1570 A/B is noted for its ease of application and its ability to hang on vertical surfaces without sag or runoff.

GENERAL PURPOSE CLEAR EPOXY LAMINATING RESIN TC-1600 A/B is an unfilled, low viscosity laminating epoxy resin for variety of fabricating applications. It features the ability to cure at room temperature for applications that do not require a working service temperature above 180°F (82°C). When post cured at elevated temperatures, this system can provide service up to 300°F (149°C). TC-1600 is commonly used to reinforce fiberglass, Kevlar/aramid, and carbon fiber fabrics. It is also used as an adhesive for bonding wood, composites, and other substrates. Adding fillers like fumed silica, micro-spheres, and short-strand fibers can create pastes for fillets, fairings, and bonding applications.

GENERAL PURPOSE WHITE LAMINATING SYSTEM TC-1604 A/B is a filled, easy to apply, laminating epoxy resin for variety of fabricating applications. Designed to be used with heavier weight fiberglass cloth (typically 8-10 oz. tooling fabric), TC-1604 can produce thick laminates without excess draining of the resin. Being a very stable system with low shrinkage, its common usages include: - Drill and Trim Fixtures - Pattern/Foundry Applications - Composite Tooling - Support Shells for Silicone Glove Molds. It features the ability to cure at room temperature for applications that do not require a working service temperature above 224°F (107°C). TC-1604 can also be used as an adhesive for bonding wood, composites, and other materials. Adding fillers like fumed silica, micro-spheres, and short-strand fibers can create pastes for fillets, fairings, and bonding applications.

HIGH TEMPERATURE EPOXY LAMINATING RESIN TC-1607 A/B is an unfilled, medium viscosity laminating resin for high temperature plastic tooling and part fabrication. This system is ideal for wet lay-up tooling applications where excellent dimensional stability and high mechanical properties are required. Features: - Easy to use for lay-ups requiring vacuum bagging - Withstands temperatures to 350°F (177°C) - Designed for fabrication nof a variety of molds

HIGH TEMPERATURE EPOXY SURFACE COAT TC-1611 A/B is an easy to apply, heat resistant, black surface coat commonly used as a face coat for epoxy laminating and casting systems. TC-1611 A/B provides excellent surface detail reproduction and has a service temperature of 350°F (177°C). - Very easy to apply - No sag or runoff when applying up to 1/16" thickness - Heat resistance to 350°F (177°C) - Provides a hard durable surface

EPOXY PENETRATING SEALING AND COATING RESIN SYSTEM TC-1614 A/B is an unfilled, low viscosity epoxy resin system. It is designed to seal porous to semi-porous substrates developing remarkable strength. TC-1614 A/B also has exceptional adhesive characteristics and is capable of high temperatures. - Easy to use and apply - Withstands temperatures in excess of 350°F (177°C) - Penetrates and seals porous surfaces with excellent adhesion - Can be pigmented for color enhancement - Works great for sealing 3D Printed parts - Recommended by several 3D Printer Manufacturers

ALUMINUM FILLED HI-TEMP EPOXY SURFACE COAT TC-1618 A/B is an aluminum filled hi-temp epoxy surface coat that provides a tough 90 Shore D surface. This resin compound can be applied with a brush, to a thickness of 1/16" on vertical surfaces or over sharp corners without sag or run-off. TC-1618 A/B features excellent heat resistance with ability to handle constant use at temperatures up to 300°F (149°C). This system does not contain "MDA" or "VCHD".

LOW VISCOSITY HIGH TEMPERATURE EPOXY LAMINATING RESIN TC-1622 A/B is an unfilled laminating resin for high temperature mold and part fabrication formulated to provide superior wet-out and adhesion to a variety of substrates. It is a great material for Vacuum Assisted Resin Transfer Molding (VARTM) as well as other wet lay-up methods due to its low viscosity and long working time. When properly cured TC-1622 A/B can be used up to 350°F (177°C).

HI-TEMP ALUMINUM FILLED CASTING RESIN SYSTEM TC-1650 A/B is an aluminum powder filled epoxy casting resin system that provides service temperatures to 350°F (177°C). TC-1650 A/B is most commonly used for the construction of molds that require good heat conductivity, outstanding durability and provide production run capability. The majority of applications for TC-1650 A/B are used in conjunction with other materials in developing composite mold structures; however, the TC-1650 A/B is frequently used by itself. - Molds for casting polyurethane, epoxy, polyester, and other materials - Vacuum form molds - Wax casting molds - Compression molds

HI TEMP ALUMINUM FILLED CASTING RESIN SYSTEM TC-1651 A/B is an aluminum powder filled epoxy casting resin system that provides service temperatures in the range of 340°F (171°C). TC-1651 A/B is most commonly used for the construction of molds that require good heat conductivity, outstanding durability, and that provide production run capability.