Adsyl 7624 XCP is an advanced polyolefin, specially designed for use as a sealing layer in co-extruded and metallizable film applications. This grade features a very low seal initiation temperature and excellent optics. It provides enhanced processability on high speed BOPP lines. It contains anti-block additives. For regulatory information please refer to Adsyl 7624 XCP Product Stewardship Bulletin (PSB).

Aquathene CM04482 is a catalyst masterbatch selected by customers for moisture cure applications. In addition to catalyst, CM04482 also contains antioxidants and metal deactivator. When melt blended at 5 wt% to Aquathene AQ120000, the resulting material is capable of crosslinking when exposed to moisture.

Aquathene CM04483 is a catalyst masterbatch selected by customers for fast curing moisture cure applications. In addition to catalyst, CM04483 also contains antioxidants and metal deactivator. When melt blended at 5 wt% to Aquathene AQ120000, the resulting material is capable of crosslinking when exposed to moisture.

Aquathene CM92949B is a black masterbatch selected by customers for moisture cure applications. CM92949B contains a 40% loading of a fine particle size carbon black for UV weather resistance and an antioxidant to ensure long-term stability and enhance performance. When CM92949B is combined with Aquathene AQ120000 and Aquathene CM04482 or Aquathene CM04483 in the correct ratio this formulation is typically used for USE and USE-2 cable applications.

Aquathene FR409800 is a colorable flame retardant masterbatch selected by customers for thermoplastic or moisture cure applications. When FR409800 is melt blended with Aquathene AQ120000 and Aquathene CM04482 or Aquathene CM04483 in a 30% / 65% / 5% ratio, respectively, and crosslinked after exposure to moisture, this formulation is typically used in low voltage power and control cable applications where UL44 and CSA 22.2 (No. 38 and No. 52) specify horizontal flame rating with 90°C service in wet locations.

Aquathene FR420000 is a colorable flame retardant catalyst masterbatch selected by customers for use in moisture cure applications. FR420000 also contains antioxidants, metal deactivator and stabilizers for sunlight resistance. When FR420000 is melt blended with Aquathene AQ120000 in a 52% / 48% ratio, respectively, and crosslinked after exposure to moisture, this formulation is typically used in low voltage power and control cable applications where UL44 and CSA 22.2 (No. 38 and No. 52) specify VW-1 and FT-4 flame rating with 90°C service in wet locations.

Aquathene FR439800 is a colorable flame retardant catalyst masterbatch selected by customers for use in moisture cure applications. When FR439800 is melt blended with Aquathene AQ120000 in a 35% / 65% ratio, respectively, and crosslinked after exposure to moisture, this formulation is typically used in low voltage power and control cable applications where UL44 specifies horizontal flame rating with 90°C service in wet locations.

Aquathene PM92949C is a black masterbatch selected by customers for moisture cure applications. PM92949C contains a 40% loading of a fine particle size carbon black for UV weather resistance, a processing aid and an antioxidant to ensure long-term stability and enhance performance. When PM92949C is melt blended with Aquathene AQ120000 and Aquathene CM04482 or Aquathene CM04483 in the correct ratio this formulation is typically used for USE and USE-2 cable applications.

Hifax 7254 XEP is a reactor TPO (thermoplastic polyolefin) manufactured using the LyondellBasell's proprietary Catalloy process technology. It is used for injection molding. It features high melt flow rate, with optimal impact/stiffness balance with controlled shrinkage. It is designed mainly for automotive applications. The grade is available in natural pellet form.

Hifax 7430 XEP is a reactor TPO (thermoplastic polyolefin) manufactured using LyondellBasell's proprietary Catalloy process technology. It is a high melt flow, medium-high flexural modulus, highly crystalline copolymer with good balance of impact and stiffness. It is primarily used in interior trim applications requiring low temperature high speed impact performance. It is also used as a component in compounded materials for automotive and industrial applications. The grade is available in natural pellet form.

Hifax CA 10 A is a reactor TPO (thermoplastic polyolefin) manufactured using the LyondellBasell proprietary Catalloy process technology. It is suitable for industrial applications where a combination of good processability and excellent softness is required. It is widely used as building block resin for flexible water-proofing membranes. Hifax CA 10 A exhibits low stiffness, low hardness and good impact resistance. The grade is available in natural pellet form.

Hifax CA 1133 A, is a reactor TPO (thermoplastic polyolefin) manufactured using the LyondellBasell's proprietary Catalloy process technology. It is used for injection molding. Hifax CA1133 A is in particular suitable for high impact strength applications, even at low temperature. The product is characterised both by medium rigidity and a very good processability as well as and excellent paintability. The grade is available in natural pellet form. For regulatory compliance information see Hifax CA 1133 A Regulatory Affairs Product Stewardship Information/Certification Data Sheet (RAPIDS), which can be found on www.polymers.lyondellbasell.com.

Hifax CA 138 A is a reactor TPO (thermoplastic polyolefin) manufactured using the LyondellBasell's proprietary Catalloy process technology. This grade is suitable for use in compounds as impact modifier, to give excellent processability whilst maintaining optimum mechanical properties. The grade is available in natural pellet form.

Hifax CA 207 A is a reactor TPO (thermoplastic polyolefin) manufactured using the LyondellBasell's proprietary Catalloy process technology. It is suitable for injection molding applications as well as for wire & cable extrusion process. As an impact modifier for compounding applications, it can be blended with other polyolefinic resins for a better shrinkage control and to improve the low temperature impact resistance. It does not contain any slip nor anti-blocking agents. The grade is available in natural pellet form.

Hifax CA 212 A is a reactor TPO (thermoplastic polyolefin) manufactured using the LyondellBasell's proprietary Catalloy process technology. It has been developed for industrial applications where a combination of good processability and excellent softness is required. The grade is available in natural pellet form.

Hifax CA 387 A is a reactor TPO (thermoplastic polyolefin) manufactured using LyondellBasell's proprietary Catalloy process technology. It has high melt flow and an excellent balance of impact, stiffness, processability and paintability. Hifax CA 387 A is primarily used for painted automotive bumper fascias that require high durability, and for other injection molded parts with paintable and weatherable requirements. It is also utilized as a component in compounded materials for a wide range of industrial applications. The grade is available in natural pellet form.

Hifax CA 60 A is a reactor TPO (thermoplastic polyolefin) manufactured using the LyondellBasell's proprietary Catalloy process technology. It has been developed for industrial applications where a combination of good processability and excellent softness is required. Due to the high fluidity Hifax CA 60 A shows high compatibility to fillers and to flame retardant additives as well as to other polyolefins. The grade is available in natural pellet form.

Hifax CA 7201 A is a reactor TPO (thermoplastic polyolefin) manufactured using the LyondellBasell's proprietary Catalloy process technology. It is primarily used for bumper and interior/exterior trim applications in Automotive. It has a very high impact performance, reduced shrinkage and a very good paintability. The material also has a high level of processability. The grade is available in natural pellet form.

Hifax CA 7271 A is a reactor TPO (thermoplastic polyolefin) manufactured using the LyondellBasell's proprietary Catalloy process technology. It is designed for injection molding controlled shrinkage applications (e.g. bumpers). Hifax CA 7271 A exhibits high melt flow rate with good impact/stiffness balance and reduced shrinkage. The grade is available in natural pellet form.

Hifax CA 7320 A is a reactor TPO (thermoplastic polyolefin) manufactured using the LyondellBasell's proprietary Catalloy process technology. It is designed for use in compounds where it shows high efficiency as impact modifier. It gives excellent processability whilst maintaining optimum mechanical properties. The grade is available in natural pellet form.

Hifax CA 7378 A is a reactor TPO (thermoplastic polyolefin) manufactured using the LyondellBasell's proprietary Catalloy process technology. It is suitable for injection molding controlled shrinkage applications (e.g. automotive exterior or interior). Hifax CA 7378 A exhibits high melt flow rate with good impact/stiffness balance and reduced shrinkage. The grade is available in natural pellet form.

Hifax CA 7441 A is a reactor TPO (thermoplastic polyolefin) manufactured using the LyondellBasell's proprietary Catalloy process technology. It is suitable for extrusion processes. It exhibits low stiffness, low hardness, combined with a high melting point and low fluidity. The grade is available in natural pellet form.

Hifax CA 7442 A is a reactor TPO (thermoplastic polyolefin) manufactured using the LyondellBasell's proprietary Catalloy process technology. It is primarily used for bumper and exterior trim applications in Automotive but can also be used as a base resin for technical compounds. It has a high impact performance and reduced shrinkage. The material also exhibits good processability. The grade is available in natural pellet form.

Hifax CA 1147 A is a thermoplastic polyolefin developed for extrusion processes, particularly for the Wire & Cable industry. Thanks to its high rubber content and structure, the main features are low stiffness, low hardness, combined with a high melting point and a medium fluidity.

Hifax CA60A NA 848 BLACK is a reactor TPO (thermoplastic polyolefin) manufactured using the LyondellBasell's proprietary Catalloy process technology. It has been developed for industrial applications where a combination of good processability and excellent softness is required. Due to the high fluidity, Hifax CA60A NA 848 BLACK shows high compatibility to fillers and to flame retardant additives as well as to other polyolefins.

This is a provisional internal only product data sheet to allow creation of MSDS and RAPIDS. When material is commercialized a full product data sheet will be completed by responsible BU.

Hifax DBF 190 D is an flexible non halogenated flame retardant compound developed for wire and cable jacketing/shielding isolation based on grades produced by Basell's propieratory Catalloy technology. The grade is designed for an excellent balance of mechanical properties and for a good thermal aging resistance by providing good electrical properties. Hifax DBF 190 D contains metal desactivators for use with metal conductors. It is used by our customers for the production of low voltage cables. The material is available in natural pellet form.

Hifax DBS 189 D is an flexible compound developed for wire and cable primary isolation based on grades produced by Basell's propieratory Catalloy technology. The grade is designed for an excellent balance of mechanical properties and for a good thermal aging resistance by providing good electrical properties. Hifax DBS 189 D contains metal desactivators for use with metal conductors. It is used by our customers for the production of low voltage cables. The material is available in natural pellet form.

HIFAX DG232 2693 is a high impact, medium flow, rubber modified grade for use in Automotive applications

Hifax EKC 244X 1 Black is a 40% talc filled, impact modified concentrate. This grade can be used in combination with Hifax EP 3080 as open compound concept.The product is available in black color, pellet form.

Hifax EKC 244X 1 Black is a 40% talc filled, impact modified concentrate. This grade can be used in combination with Hifax EP 3080 as open compound concept.

Hifax EYC335P is a 17% mineral fillled high impact copolymer for injection moulding. The grade features very high fluidity and low coefficient of dilatation. Typical customer applications are unpainted and painted bumpers. The grade is available in custom colour.

Hifax RTA3223 medium melt flow, 1,600 MPa flexural modulus, paintable, mineral filled thermoplastic olefin (TPO) resin has a very good combination of strength, stiffness and dimensional stability. It was designed primarily for rigid automotive exterior ornamentation applications. Typical applications include automotive claddings and rocker panels, license plate brackets, appliques, filler panels and grilles.

Hifax RTA3263UV medium melt flow 1,600 MPa flexural modulus, paintable, mineral filled thermoplastic olefin (TPO) resin has balanced rigidity, impact strength and dimensional stability. It was designed primarily for rigid automotive exterior ornamentation applications requiring good weatherability. Typical applications include automotive claddings, rocker panels, license plate brackets, appliques and filler panels.

High Impact filled grade with very high scratch resistance added mould release

High impact filled grade with very high scratch resistance.

TKC220X 1 is a High Impact filled grade

"Hifax" TKS 428P is an unfilled, impact modified grade for spoiler applications with excellent impact/stiffness balance, good flowability, tiger stripe free and UV stabilized. The grade has been specifically designed for moulding large complex parts that require high impact strength as well as good stiffness.