*Previously TECHNYL XA 2206 BK TECHNYL SAFE AX 219FC V50 BK is designed to be used in moulded part requiring improved stiffness, dimensional stability, improved surface finished, low warpage in consumer & industrial goods as well as appliances in contact with food.

*Previously DOMAMID 6LVFC NC TECHNYL SAFE C 116FC NC is a polyamide 6, unfilled, improved flowability, food contact approved for injection moulding. Designed to be used for food contact in industrial consumer good as well as appliance applications.

*Previously DOMAMID 6FC NC TECHNYL SAFE C 216FC NC is a polyamide 6, unfilled, food contact approved for injection moulding. Designed to be used in moulded parts requiring food contact compliance in industrial, consumer good as well as appliance applications.

TECHNYL SAFE C 216FC V10 NC is a polyamide 6, 10% glass fiber reinforced, food contact approved for injection moulding. Designed to be used in moulded part requiring good mechanical properties and food contact compliance in industrial consumer good as well as appliance applications.

*Previously DOMAMID 6G30FC 300 BK TECHNYL SAFE C 216FC V30 BK is a polyamide 6, 30% glass fiber reinforced, food contact approved for injection moulding. Designed to be used in moulded parts requiring food contact compliance in industrial, consumer good as well as appliance applications.

*Previously DOMAMID 6G30FC 300 NC TECHNYL SAFE C 216FC V30 NC is a polyamide 6, 30% glass fiber reinforced, food contact approved for injection moulding. Designed to be used in moulded parts requiring food contact compliance in industrial, consumer good as well as appliance applications.

*Previously DOMAMID 6G40FC 300 NC TECHNYL SAFE C 216FC V40 NC is a polyamide 6, 40% glass fiber reinforced, food contact approved for injection moulding. Designed to be used in moulded part requiring good mechanical properties and food contact compliance in industrial consumer good as well as appliance applications.

*Previously DOMAMID 6G50FC 300 BK SAFE C 216FC V50 BK is a polyamide 6, 50% glass fiber reinforced, food contact approved for injection moulding. Designed to be used in moulded part requiring good mechanical properties and food contact compliance in industrial consumer good as well as appliance applications.

*Previously DOMAMID 6G50FC 300 NC SAFE C 216FC V50 NC is a polyamide 6, 50% glass fiber reinforced, food contact approved for injection moulding. Designed to be used in moulded part requiring good mechanical properties and food contact compliance in industrial consumer good as well as appliance applications.

*Previously DOMAMID PW 6FC NC TECHNYL SAFE C 216FCPW NC is a polyamide 6, unfilled, in powder form , food contact approved for rotational moulding .Designed to be used in moulded parts requiring food contact compliance in industrial consumer good as well as appliance applications.

*Previously DOMAMID 6I1FC TECHNYL SAFE C 216MFC NC is a polyamide 6, unfilled, impact modified, food contact approved for injection moulding. Designed to be used in moulded parts requiring food contact compliance in industrial, consumer good as well as appliance applications.

TECHNYL SAFE C 216WFC V30 BK is a polyamide 6, 30% glass fibre reinforced, food contact and drinking water approved, for injection moulding. Designed to be used in moulded part requiring good stiffness and hydrolysis resistance in consumer & industrial goods as well as appliances in contact with drinking water. WRAS approval at 85°C.

TECHNYL SAFE C 216WFC V30 NC is a polyamide 6, 30% glass fibre reinforced, food contact and drinking water approved, for injection moulding. Designed to be used in moulded part requiring good stiffness and hydrolysis resistance in consumer & industrial goods as well as appliances in contact with drinking water. WRAS approval at 85°C.

TECHNYL SAFE C 216WFC V50 BK is a polyamide 6, 50% glass fibre reinforced, food contact and drinking water approved, for injection moulding. Designed to be used in moulded part requiring improved stiffness, dimensional stability and hydrolysis resistance versus PA6GF30 in consumer & industrial goods as well as appliances in contact with drinking water. WRAS approval at 85°C.

TECHNYL SAFE C 216WFC V50 NC is a polyamide 6, 50% glass fibre reinforced, food contact and drinking water approved, for injection moulding. Designed to be used in moulded part requiring improved stiffness, dimensional stability and hydrolysis resistance versus PA6GF30 in consumer & industrial goods as well as appliances in contact with drinking water. WRAS approval at 85°C.

*Previously DOMAMID 6N1FC NC TECHNYL SAFE C 226FC NC is a polyamide 6, unfilled, improved flowability, food contact approved for injection moulding. Designed for fast cycling injection moulding to be used in food contact in industrial consumer good as well as appliance applications.

*Previously DOMAMID 6N2FC NC TECHNYL SAFE C 226FFC NC is a polyamide 6, unfilled ,improved flowability, food contact approved for injection moulding. Designed for very fast cycling injection moulding to be used in food contact in industrial consumer good as well as appliance applications.

*Previously DOMAMID 6MVFC TECHNYL SAFE C 316FC NC is a polyamide 6, unfilled, medium viscosity, food contact approved for injection moulding and extrusion. Designed to be used in parts requiring food contact compliance in industrial consumer goods applications as well as appliance applications.

*Previously DOMAMID 6B30FC TECHNYL SAFE C216FC S30 NC is a polyamide 6, 30 % glass beads reinforced, food contact approved for injection moulding. Designed to be used for food contact in industrial consumer good applications as well as appliance applications requiring excellent surface finish and low warpage.

*Previously TECHNYL eXten D 219WFC V30 BLACK TECHNYL SAFE D 219WFC V30 BK is a polyamide 6.10, 30% glass fibre reinforced, heat stabilized with organic stabilizers, for injection moulding. Designed to offer lower water uptake, higher dimensional stability and enhanced chlorine resistance versus PA 6.6 for cold and warm temperature in domestic and industrial water management components including, but not limited to, components in contact with drinking water where elevated levels of chlorine could be present.

*Previously TECHNYL eXten D 219WFC V50 BLACK TECHNYL SAFE D 219WFC V50 BK is a polyamide 6.10, 50% glass fibre reinforced, heat stabilized with organic stabilizers, for injection moulding. Designed to offer lower water uptake, higher dimensional stability and enhanced chlorine resistance versus PA 6.6 for cold and warm temperature in domestic and industrial water management components including, but not limited to, components in contact with drinking water where elevated levels of chlorine could be present.

*Previously TECHNYL A 402H1 NATURAL TECHNYL SHAPE A 402H1 NC is an unreinforced polyamide 66, very high viscosity, heat stabilized, for extrusion and injection moulding. This grade offers three main advantages: high impact resistance at low humidity levels, good rigidity, and excellent compression resistance.

*Previously TECHNYL A 548B V15 BLACK 23N TECHNYL SHAPE A 548B V15 BK 23N is a polyamide 66 reinforced with 15% of glass fibre, heat stabilized, impact modified, for blow moulding. This grade offers an excellent long term Heat resistance and is suitable to work in environments characterized by a very high temperature. It has been also specially designed to be perfectly suitable for blow moulding processing.

*Previously TECHNYL A 548B2 V15 BLACK 23N TECHNYL SHAPE A 548B2 V15 BK 23N is a polyamide 6.6, reinforced with 15% of glass fibre, heat stabilized, impact modified, for blow moulding. This grade offers an excellent long term Heat resistance and is suitable to work in environments characterized by a very high temperature. It has been also specially designed to be perfectly suitable for blow moulding processing.

*Previously DOMAMID 6HV NC01 Polyamide 6, high viscosity, for injection moulding

*Previously TECHNYL C 402M NATURAL TECHNYL SHAPE C 402M NC is an unreinforced polyamide 6, high viscosity, for extrusion. This grade offers high flexibility and high impact performance.

*Previously DOMAMID 6HVPS3 NC01 Polyamide 6, plasticized, high viscosity, for extrusion

*Previously TECHNYL C 442 BLACK V TECHNYL SHAPE C 442 BK V is an unreinforced polyamide 6, impact modified, high viscosity, for extrusion. This grade offers high flexibility and very high impact resistance even at low temperature.

*Previously DOMAMID 6HVI4H2HR2 BK Polyamide 6, heat-aging stabilized, hydrolisis stabilized, impact modified, high viscosity, for extrusion of pipes, black

*Previously TECHNYL C 548B BLACK TECHNYL SHAPE C 548B BK is an unreinforced polyamide 6, high viscosity, for extrusion blow-moulding. This grade offers a good processing behaviour, high impact resistance even at low temperature and high barrier properties especially to fluids such as fuels and oils, as well as a high toughness.

*Previously DOMAMID 6/PP 303 NC Polyamide 6 - Polypropylene, for extrusion of film and thin sheeting, natural color

*Previously TECHNYL eXten D 437P NATURAL TECHNYL SHAPE D 437P NC is an unfilled polyamide 6.10, medium viscosity, unfilled, plasticized, UV and heat stabilized, for extrusion applications. This polyamide 6,10 for extrusion is specially performing where high flexibility and toughness are requested. It is specially developed for automotive and other applications where a long term high temperature usage is requested. It is a partially bio-sourced material.

*Previously TECHNYL eXten D 458P BLACK TECHNYL SHAPE D 458P BK is a high viscosity unfilled plasticized PA6.10 for extrusion applications. This grade is also UV stabilized. This polyamide 6,10 for extrusion is specially performing where high flexibility and toughness are requested. It is specially developed for automotive and other applications where a long term high temperature usage is requested. It is a partially bio-sourced material.

*Previously TECHNYL eXten DA 438CR BLACK TECHNYL SHAPE DA 438CR BK is a polyamide 6.10 / PA66 blend, unfilled, for extrusion purpose. It offers excellent compatibility with refrigerants, good resistance to deicing salts, and high burst pressure at temperature around 100°C. It is also suitable for thermoforming and welding. TECHNYL SHAPE DA 438CR BK has been specially design for HVAC lines or refrigerant lines for battery cooling. The results shown are based on an experimental grade. These results will be further enhanced and improved as more industrial lots are produced and statistical data are available.

*Previously DOMAMID L 66G30TF15 Polyamide 66, 30% glass fiber reinforced, for injection moulding, black

*Previously TECHNYL A 216 V30 Y17 N NATURAL TECHNYL SLIDE A 216 V30 Y17 N NC is a polyamide 66, reinforced with 30% of glass fibre, modified with molybdenum disulphide and graphite, for injection moulding. This grade offers an excellent combination between thermal and mechanical properties. This grade has a low friction coefficient.

*Previously TECHNYL A 218 Y10 NATURAL TECHNYL SLIDE A 218 Y10 NC is an unreinforced polyamide 66, heat stabilized and specially modified to have improved frictionnal properties (molybdenum disulfide) for injection moulding. This grade offers all of the primary properties of unreinforced polyamide 66 and has excellent surface properties as low coefficient of friction and good resistance to wear.

*Previously DOMAMID L 6G50Y10 Polyamide 6, 50% glass fiber reinforced, for injection moulding

TECHNYL XA 1081 BK 2N is suitable for extrusion of pipes with large diameter and thickness.

TECHNYL XA 1722 Orange 2702 is a polyamide PA 66, reinforced with 30% of glass fiber, self-coloured in Orange RAL 2003 & is suitable for Injection-moulding. This grade offers a unique Polyamide 66 solution for E-Mobility applications requiring Orange color as a functional property during all application lifetime. Thanks to a specific combination of coloring additives & thermal stabilizers, this grade exhibits an undisputable high color retention under thermal stress with a Polyamide based material. It provides consequently all benefits associated to a Polyamide compound, superior electrical insulation performances & high mechanical properties. It is furthermore suitable for UV laser-marking.