Prospector®

Hostaform® S 27063

Generic Family: Acetal (POM) Copolymer • Supplied by: Celanese Corporation
Easy flowing elastomer-containing injection molding grade; moderate toughness
Chemical abbreviation according to ISO 1043-1: POM-HI, Molding compound ISO 29988- POM-K, M-GNPR, 05-001 POM copolymer, modified Easy flowing elastomer-containing injection molding type based on HOSTAFORM® C 27021; with higher impact strength and slightly lower hardness, rigidity and chemical resistance than the basic type; high resistance to thermal and oxidative degradation. UL-registration in natural and a thickness more than 1.57 mm as UL 94 HB. Burning rate ISO 3795 and FMVSS 302 < 100 mm/min for a thickness more than 1 mm thickness. Ranges of applications: For thin-walled molded parts with higher energy-absorbing capacity UL = Underwriters Laboratories (USA) FMVSS = Federal Motor Vehicle Safety Standard (USA)
General Properties

Access the complete datasheet details for Hostaform® S 27063 when you create your free account with Prospector. You’ll find complete information on physical, mechanical and hardness specs.

Material Status
Commercial: Active
Documents
UL Yellow Cards

E42337 - Celanese Services Germany GmbH

Download Document
Availability
Africa & Middle East, Asia Pacific, Europe, Latin America, North America
Uses
Automotive Applications
Automative Specification
BMW GS 93016
Processing Method
Injection Molding
Multi-Point Data
  • Isothermal Stress vs. Strain (ISO 11403)
  • Secant Modulus vs. Strain (ISO 11403)
  • Shear Stress vs. Shear Rate (ISO 11403)
  • Viscosity vs. Shear Rate (ISO 11403)
Other Properties
Additive, Features, Forms, Density, Melt Volume-Flow Rate (MVR), Molding Shrinkage, Water Absorption Sat/23C, Water Absorption 23C/50RH, Tensile Modulus, Tensile Stress at Yield, Tensile Strain at Yield, Nominal Tensile Strain at Break, Tensile Creep Modulus 1h, Tensile Creep Modulus 1000h, Flexural Modulus, Poisson's Ratio, Charpy Notched Impact Strength, Charpy Unnotched Impact Strength, Ball Indentation Hardness, DTUL (1.80 MPa) Unannealed, Vicat Softening Temperature, Melting Temperature, Coefficient of Linear Thermal Expansion, Flow, Surface Resistivity, Volume Resistivity, Electric Strength, Relative Permittivity, Dissipation Factor, Comparative Tracking Index (CTI), Flame Rating, Additional Properties, Drying Temperature, Drying Time, Suggested Max Moisture, Hopper Temperature, Rear Temperature, Middle Temperature, Front Temperature, Nozzle Temperature, Processing (Melt) Temp, Mold Temperature, Injection Rate, Back Pressure
Access 43 properties in Plastics. Create your free account or sign into Prospector.
Processing

Find specific processing information for Hostaform® POM as well as general information for the Acetal (POM) Copolymer generic family. Register or Sign In for more information.

Where To Buy

You can purchase Hostaform® S 27063 from 6 distributors or manufacturers. Register or Sign In for more information.

Prospector Sign in / Register
Premium Features
Find UL Yellow Cards
UL Yellow Cards

UL's Yellow Cards are a globally recognized safety and quality guarantee, a certified demonstration of how plastics have met a specific set of performance credentials.

Find UL Yellow Cards

PROSPECTOR

Find solutions, not just materials.

When you join Prospector, you leverage the dynamic tools and features to find solutions fast.

Register Today