Prospector®
  • Home
  • Hostaform® SlideX® C0313 XAP®2

Hostaform® SlideX® C0313 XAP®2

Generic Family: Acetal (POM) Copolymer • Supplied by: Celanese Corporation
POM, Tribology
POM copolymer Injection molding grade with tribological modification for demanding applications that require prevention of audible noise caused by stick-slip phenomenon. Excellent tribological performance with low friction and low wear under various conditions of sliding against plastics and metals. Reduced emission grade. Emissions according to VDA 275 < 5 mg/kg.  Material is also food contact compliant in certain countries and for certain conditions of use (contact Celanese for further information). Chemical abbreviation according to ISO 1043-1: POM Molding compound ISO 29988-1: POM-K | M-GNRS2 | 4-2 | - | POM copolymer
General Properties

Access the complete datasheet details for Hostaform® SlideX® C0313 XAP®2 when you create your free account with Prospector. You’ll find complete information on physical, mechanical and hardness specs.

Material Status
Commercial: Active
Documents
UL Yellow Cards

E38860 - CELANESE INTERNATIONAL CORP

Download Document
Availability
Africa & Middle East, Asia Pacific, Europe, Latin America, North America
Uses
Automotive Applications
Automative Specification
DAIMLER DBL 5404
Processing Method
Injection Molding
Multi-Point Data
  • Creep Modulus vs. Time (ISO 11403)
  • Creep Strain vs. Time (ISO 11403)
  • Isochronous Stress vs. Strain (ISO 11403)
  • Isothermal Stress vs. Strain (ISO 11403)
  • Secant Modulus vs. Strain (ISO 11403)
Other Properties
Features, Forms, Density, Melt Volume-Flow Rate (MVR), Molding Shrinkage, Water Absorption Sat/23C, Water Absorption 23C/50RH, Tensile Modulus, Tensile Stress at Yield, Tensile Strain at Yield, Nominal Tensile Strain at Break, Flexural Modulus, Compressive Stress, Charpy Notched Impact Strength, Charpy Unnotched Impact Strength, Ball Indentation Hardness, DTUL (0.45 MPa) Unannealed, DTUL (1.80 MPa) Unannealed, Vicat Softening Temperature, Melting Temperature, Coefficient of Linear Thermal Expansion, Flow, Coefficient of Linear Thermal Expansion, Transverse, Additional Properties, Drying Temperature, Drying Time, Suggested Max Moisture, Hopper Temperature, Rear Temperature, Middle Temperature, Front Temperature, Nozzle Temperature, Processing (Melt) Temp, Mold Temperature, Injection Rate, Back Pressure
Access 35 properties in Plastics. Create your free account or sign into Prospector.
Processing

Find specific processing information for Hostaform® POM as well as general information for the Acetal (POM) Copolymer generic family. Register or Sign In for more information.

Where To Buy

You can purchase Hostaform® SlideX® C0313 XAP®2 from 6 distributors or manufacturers. Register or Sign In for more information.

Prospector Sign in / Register
Premium Features
Find UL Yellow Cards
UL Yellow Cards

UL's Yellow Cards are a globally recognized safety and quality guarantee, a certified demonstration of how plastics have met a specific set of performance credentials.

Find UL Yellow Cards

PROSPECTOR

Find solutions, not just materials.

When you join Prospector, you leverage the dynamic tools and features to find solutions fast.

Register Today