Alcryn® ALR 7958 MPR is a black material that has a 78 shore A hardness, greater than 1800 psi tensile strength and is black in color.

High melt flow, mineral-filled thermoplastic elastomeric olefin (TEO) with a good balance of properties and processability. Contains recycled polypropylene resin.

DEXFLEX 1010E is a thermoplastic olefinic elastomer (TPO) developed for automotive airbag covers. This material is being designed to provide low-temperature impact, superior dimensional stability and improved processing characteristics. DEXFLEX 1010E material will be provided precolored or natural. DEXFEX 1010E material is engineered for passenger-side airbag covers. Its superior dimensional stability makes it desirable for top-mounted applications, either as a substrate or a cover material

DEXFLEX 1011E is a thermoplastic olefinic elastomer (TPO) designed for use as an automotive airbag cover with requirements to deploy at temperatures between -40°C and +100°C. This material is being designed to provide low-temperature toughness in combination with higher stiffness. DEXFLEX 1011E material will be provided mold-in-color or black. DEXFEX 1011E material is engineered for passenger-side-, knee-or Thorax-airbag applications.

DEXFLEX® 711 is a thermoplastic olefinic elastomer (TPO) compounded with postindustrial/post-consumer recycled materials. It is designed for use in applications that are black but not color matched, and that require very good processing characteristics. Applications: Under-the-Hood & Structural Applications, Exterior Applications

Dexflex 711-300 BLK is a thermoplastic olefinic elastomer (TPO) compounded with post-industrial/post-consumer recycled materials. It is typically used for use in applications that are black but not color-matched, and that require very good processing characteristics.

Dexflex 727 FP BLK is a thermoplastic olefinic elastomer (TPO) designed for painted automotive exterior applications that require a combination of stiffness, good low-temperature impact resistance and excellent processability.

Dexflex 727 RXF is a thermoplastic olefinic elastomer (TPO) typically used for automotive exterior applications that require a combination of stiffness, good low-temperature impact resistance and excellent processability.

Dexflex 727 is a thermoplastic olefinic elastomer (TPO) designed for automotive exterior applications that require a combination of stiffness, good low-temperature impact resistance, and excellent processability.

Dexflex 756-67-2 medium-low melt flow, medium-low flexural modulus, engineered thermoplastic polyolefin (TPO) resin was designed for automotive air bag covers.

DEXFLEX 756-68E is a thermplastic olefinic elastomer (TPO) designed for use as an automotive airbag cover with requirements to deploy at temperatures between -40°C and +100°C. DEXFEX 1012E material is engineered for passenger-side and side airbag covers.

DEXFLEX® 810-1 is a thermoplastic olefinic elastomer (TPO) that offers excellent weatherability, paintability and processability. DEXFLEX® 810-1 was designed for fascia applications that must meet or exceed the requirements of US 5-mph bumper-impact regulations. Applications: Exterior Applications, Bumper

Dexflex 815 BLK XXX is a thermoplastic olefinic elastomer (TPO) is typically used for exterior automotive applications that require a combination of stiffness, low-temperature impact resistance and excellent processability.

Dexflex 826HF-UV is a thermoplastic olefinic elastomer (TPO) designed for large automotive exterior, painted applications.

Dexflex 910 high melt flow, medium modulus, mineral-filled thermoplastic elastomeric olefin has a good balance of properties.

Dexflex 913-UV is a thermoplastic olefinic elastomer (TPO) designed for automotive exterior applications that require high stiffness, heat resistance, and weatherability.

DEXFLEX® 940 is a thermoplastic olefinic elastomer (TPO) designed for large automotive exterior painted applications Typical Customer Applications: Exterior Applications, Bumpers

Dexflex 940B FP is a thermoplastic olefinic elastomer (TPO) designed for large automotive exterior, painted applications.

Dexflex 940D FP is a thermoplastic olefinic elastomer (TPO) designed for large automotive exterior, painted applications.

Dexflex D45 BLK AP is a thermoplastic olefinic elastomer (TPO) that is typically used for automotive exterior applications that require excellent low-temperature properties and excellent weatherability.

Dexflex D60-UV 4LLA is a thermoplastic olefinic elastomer (TPO) typically used for automotive exterior

Dexflex D60-UV G01 is a thermoplastic olefinic elastomer (TPO) typically used for automotive exterior

Dexflex D60-UV is a thermoplastic olefinic elastomer (TPO) designed for automotive exterior applications that require toughness, low thermal expansion and exceptional weatherability.

Dexflex E1800 thermoplastic olefin (TPO) is low cost material designed for extruded and thermoformed applications. This product is not UV stabilized and is aimed at general-purpose use where extreme performance is not required.

Dexflex E756-1 BLK is an unfilled PP TPO copolymer with excellent impact resistance.

DEXPRO E420-UV BLK is a fractional melt flow, high flexural modulus thermoplastic polyolefin (TPO) formulated for ease of processing. It is typically used for thermoformed applications that require low-temperature toughness and dimensional stability.

DuraGrip® DGR 6030BK is designed to be a general-purpose Thermoplastic Elastomer (TPE) that is easy to use in an injection molding process. DGR 6030BK has an excellent soft touch feel, will bond to olefinics, and is easy to color. DuraGrip® is not hygroscopic and under normal conditions does not require drying.

DuraGrip® DGR 6030NC is designed to be a general-purpose Thermoplastic Elastomer (TPE) that is easy to use in an injection molding process. DGR 6030NC has an excellent soft touch feel, will bond to olefinics, and is easy to color. DuraGrip® is not hygroscopic and under normal conditions does not require drying.

DuraGrip® DGR 6040 NC is designed to be a general-purpose Thermoplastic Elastomer (TPE) that is easy to use in an injection molding process. DGR 6040NC has an excellent soft touch feel and will bond to olefinics. DuraGrip® is not hygroscopic and under normal conditions does not require drying.

DuraGrip® DGR 6050NC is designed to be a general-purpose Thermoplastic Elastomer (TPE) that is easy to use in an injection molding process. DGR 6050NC has an excellent soft touch feel, will bond to olefinics, and is easy to color. DuraGrip® is not hygroscopic and under normal conditions does not require drying.

DuraGrip® 6070BK is a general-purpose Thermoplastic Elastomer (TPE) designed for injection molding processes. It has a high coefficient of friction, low melt viscosity and bonds well to polypropylene. DuraGrip® 6070BK is not hygroscopic and under normal conditions does not require drying.

DuraGrip® DGR 6070NC is designed to be a general-purpose Thermoplastic Elastomer (TPE) that is easy to use in an injection molding process. DGR 6070NC has an excellent soft touch feel, will bond to olefinics, is easy to color, and is available in FDA compliant formulations. DuraGrip® is not hygroscopic and under normal conditions does not require drying.

DuraGrip® DGR 6080NC is designed to be a general-purpose Thermoplastic Elastomer (TPE) that is easy to use in an injection molding process. DGR 6080NC has an excellent soft touch feel, will bond to olefinics, and is easy to color. DuraGrip® is not hygroscopic and under normal conditions does not require drying.

DuraGrip® 6150BK is designed to be a special purpose Melt Processible Elastomer (MPE) that is easy to use in injection molding and extrusion processes. DGR 6150BK has an excellent soft touch feel and will Bond to Nylon, ABS, PC, PC/ABS. DuraGrip® 6100 series is hygroscopic and requires drying prior to use.

DuraGrip® DGR 6150 is offered in an NC (colorable) version, and is designed to chemically bond to a wide variety of thermoplastic substrates including ABS, PC, Nylon 6, Nylon 6/6, glass filled Nylon, ASA, PC/ABS alloys, PBT, and PC/PBT alloys. It is easy to use in injection molding and extrusion processes. DGR 6150NC has excellent elastomeric properties and soft touch feel. DuraGrip® bonding grades are hygroscopic, and for best results drying is recommended prior to use.

DuraGrip® 6160BK is designed to be a special purpose Melt Processible Elastomer (MPE) that is easy to use in injection molding and extrusion processes. DGR 6160BK has an excellent soft touch feel and will Bond to Nylon, ABS, PC, PC/ABS. DuraGrip® 6100 series is hygroscopic and requires drying prior to use.

DuraGrip® DGR 6160 is offered in an NC (colorable) version, and is designed to chemically bond to a wide variety of thermoplastic substrates including ABS, PC, Nylon 6, Nylon 6/6, glass filled Nylon, ASA, PC/ABS alloys, PBT, and PC/PBT alloys. It is easy to use in injection molding and extrusion processes. DGR 6160NC has excellent elastomeric properties and soft touch feel. DuraGrip® bonding grades are hygroscopic, and for best results drying is recommended prior to use.

DuraGrip® 6170BK is designed to be a special purpose Melt Processible Elastomer (MPE) that is easy to use in injection molding and extrusion processes. DGR 6170BK has an excellent soft touch feel and will Bond to Nylon, ABS, PC, PC/ABS. DuraGrip® 6100 series is hygroscopic and requires drying prior to use.

DuraGrip® DGR 6170 is offered in an NC (colorable) version, and is designed to chemically bond to a wide variety of thermoplastic substrates including ABS, PC, Nylon 6, Nylon 6/6, glass filled Nylon, ASA, PC/ABS alloys, PBT, and PC/PBT alloys. It is easy to use in injection molding and extrusion processes. DGR 6170NC has excellent elastomeric properties and soft touch feel. DuraGrip® bonding grades are hygroscopic, and for best results drying is recommended prior to use.