Sipolprene® 25170 B (black color version in dry blend) is an ether ester thermoplastic elastomer (TPC-ET), developed and manufactured by Sipol, with a nominal hardness of Shore D 27, a very low modulus, and a rheological behaviour, which makes it suitable for injection molding and extrusion processing.

Sipolprene® 25170 W is an ether ester thermoplastic elastomer (TPC-ET), developed and manufactured by Sipol, with a nominal hardness of Shore D 27, a very low modulus, and a rheological behaviour, which makes it suitable for injection molding and extrusion processing. Sipolprene® 25170 W comes in a dry blend UV-stabilized version.

Sipolprene® 25170 is an ether ester thermoplastic elastomer (TPC-ET), developed and manufactured by Sipol, with a nominal hardness of Shore D 27, a very low modulus, and a rheological behaviour, which makes it suitable for injection molding and extrusion processing. Sipolprene® 25170 comes in a natural color with a standard stabilisation package, fully in compliance with American FDA and European EU 10/2011 Food Contact Regulations. Black color and/or UV stabilised and/or heat stabilised are all available in dry blend version on request.

Sipolprene® 25185 B (black color version in dry blend) is an ether ester thermoplastic elastomer (TPC-ET), developed and manufactured by Sipol, with a nominal hardness of Shore D 29, a low modulus, and a rheological behaviour, which makes it suitable for injection moulding and extrusion processing.

Sipolprene® 25185 W is an ether ester thermoplastic elastomer (TPC-ET), developed and manufactured by Sipol, with a nominal hardness of Shore D 29, a low modulus, and a rheological behaviour, which makes it suitable for injection moulding and extrusion processing. Sipolprene® 25185 W comes in a dry blend UV-stabilised version.

Sipolprene® 25185 is an ether ester thermoplastic elastomer (TPC-ET), developed and manufactured by Sipol, with a nominal hardness of Shore D 29, a low modulus, and a rheological behaviour, which makes it suitable for injection moulding and extrusion processing. Black colour and/or UV stabilised and/or heat stabilised are all available in dry blend version on request.

Sipolprene® 35150 B (black color version in dry blend) is a block ether ester thermoplastic elastomer (TPC-ET), developed and manufactured by Sipol, with a nominal hardness of Shore D 36, a low modulus, and a rheological behaviour that makes it suitable for injection moulding and extrusion processing. It has been specifically developed with a low melting point which makes it suitable for blending with PVC to make soft compounds plasticizer free.

Sipolprene® 35150 is an ether ester thermoplastic elastomer (TPC-ET), developed and manufactured by Sipol, with a nominal hardness of Shore D 36, a low modulus, and a rheological behaviour, which makes it suitable for injection molding and extrusion processing. Sipolprene® 35150 has been specifically developed with a low melting point which make it suitable for blending with PVC to make soft compounds plasticizer free. Sipolprene® 35150 comes in a natural color with a standard stabilisation package fully in compliance with American FDA and European EU 10/2011 Food Contact Regulations. Black color and/or UV stabilised and/or heat stabilised are all available in dry blend version on request.

Sipolprene® 35180 B (black color version in dry blend) is an ether ester thermoplastic elastomer (TPC-ET), developed and manufactured by Sipol, with a nominal hardness of Shore D 35, a low modulus, and a rheological behaviour, which makes it suitable for injection moulding and extrusion processing. Black colour and/or UV stabilised and/or heat stabilised are all available in dry blend version on request.

Sipolprene® 35180 W is an ether ester thermoplastic elastomer (TPC-ET), developed and manufactured by Sipol, with a nominal hardness of Shore D 35, a low modulus, and a rheological behaviour, which makes it suitable for injection molding and extrusion processing. Sipolprene® 35180 W comes in a dry blend UV-stabilised version.

Sipolprene® 35180 WB is an ether ester thermoplastic elastomer (TPC-ET), developed and manufactured by Sipol, with a nominal hardness of Shore D 35, a low modulus, and a rheological behaviour, which makes it suitable for injection molding and extrusion processing. Sipolprene® 35180 WB comes in a dry blend UV-stabilised and black color version.

Sipolprene® 35180 is an ether ester thermoplastic elastomer (TPC-ET), developed and manufactured by Sipol, with a nominal hardness of Shore D 35, a low modulus, and a rheological behaviour, which makes it suitable for injection molding and extrusion processing. Sipolprene® 35180 comes in a natural color with a standard stabilisation package, fully in compliance with American FDA and European EU 10/2011 Food Contact Regulations. Black color and/or UV stabilised and/or heat stabilised are all available in dry blend version on request.

Sipolprene® 35195 B (black color version in dry blend) is an ether ester thermoplastic elastomer (TPC-ET), developed and manufactured by Sipol, with a nominal hardness of Shore D 35, a low modulus, and a rheological behaviour, which makes it suitable for injection moulding and extrusion processing.

Sipolprene® 35195 W is an ether ester thermoplastic elastomer (TPC-ET), developed and manufactured by Sipol, with a nominal hardness of Shore D 35, a low modulus, and a rheological behaviour, which makes it suitable for injection moulding and extrusion processing. Sipolprene® 35195 W comes in a dry blend UV-stabilised version.

Sipolprene® 35195 is an ether ester thermoplastic elastomer (TPC-ET), developed and manufactured by Sipol, with a nominal hardness of Shore D 35, a low modulus, and a rheological behaviour, which makes it suitable for injection moulding and extrusion processing. Black colour and/or UV stabilised and/or heat stabilised are all available in dry blend version on request.

Sipolprene® 40171 is an ether ester thermoplastic elastomer (TPC-ET), developed and manufactured by Sipol, with a nominal hardness of Shore D 38 and a rheological behaviour, which makes it suitable for injection molding and extrusion processing.

Sipolprene® 46185 B (black color version in dry blend) is an ether ester thermoplastic elastomer (TPC-ET), developed and manufactured by Sipol, with a nominal hardness of Shore D 44, a low modulus, and a rheological behaviour, which makes it suitable for injection moulding and extrusion processing.

Sipolprene® 46185 W is an ether ester thermoplastic elastomer (TPC-ET), developed and manufactured by Sipol, with a nominal hardness of Shore D 44, a low modulus, and a rheological behaviour, which makes it suitable for injection moulding and extrusion processing. Sipolprene® 46185 W comes in a dry blend UV-stabilised version.

Sipolprene® 46185 is an ether ester thermoplastic elastomer (TPC-ET), developed and manufactured by Sipol, with a nominal hardness of Shore D 44, a low modulus, and a rheological behaviour, which makes it suitable for injection molding and extrusion processing. Sipolprene® 46185 comes in a natural color with a standard stabilisation package, fully in compliance with American FDA and European EU 10/2011 Food Contact Regulations. Black color and/or UV stabilised and/or heat stabilised are all available in dry blend version on request.

Sipolprene® 55200 B (black color version in dry blend) is an ether ester thermoplastic elastomer (TPC-ET), developed and manufactured by Sipol, with a nominal hardness of Shore D 52, a medium modulus, and a rheological behaviour, which makes it suitable for injection molding and extrusion processing.

Sipolprene® 55200 W is an ether ester thermoplastic elastomer (TPC-ET), developed and manufactured by Sipol, with a nominal hardness of Shore D 52, a medium modulus, and a rheological behaviour, which makes it suitable for injection moulding and extrusion processing. Sipolprene® 55200 W comes in a dry blend UV-stabilised version.

Sipolprene® 55200 is an ether ester thermoplastic elastomer (TPC-ET), developed and manufactured by Sipol, with a nominal hardness of Shore D 52, a medium modulus, and a rheological behaviour, which makes it suitable for injection molding and extrusion processing. Sipolprene® 55200 comes in a natural color with a standard stabilisation package, fully in compliance with American FDA and European EU 10/2011 Food Contact Regulations. Black color and/or UV stabilised and/or heat stabilised are all available in dry blend version on request.

Sipolprene® 55211 is an ether ester thermoplastic elastomer (TPC-ET), developed and manufactured by Sipol, with a nominal hardness of Shore D 54 and a rheological behaviour, which makes it suitable for injection moulding and extrusion processing.

Sipolprene® 58210 B (black color version in dry blend) is an ether ester thermoplastic elastomer (TPC-ET), developed and manufactured by Sipol, with a nominal hardness of Shore D 58, a medium modulus, and a rheological behaviour, which makes it suitable for injection moulding and extrusion processing.

Sipolprene® 58210 W is an ether ester thermoplastic elastomer (TPC-ET), developed and manufactured by Sipol, with a nominal hardness of Shore D 58, a medium modulus, and a rheological behaviour, which makes it suitable for injection molding and extrusion processing. Sipolprene® 58210 W comes in a dry blend UV-stabilized version.

Sipolprene® 58210 is an ether ester thermoplastic elastomer (TPC-ET), developed and manufactured by Sipol, with a nominal hardness of Shore D 58, a medium modulus, and a rheological behaviour, which makes it suitable for injection molding and extrusion processing. Sipolprene® 58210 comes in a natural color with a standard stabilisation package, fully in compliance with American FDA and European EU 10/2011 Food Contact Regulations. Black color and/or UV stabilised and/or heat stabilised are all available in dry blend version on request.

Sipolprene® 63210 B (black color in dry blend version) is an ether ester thermoplastic elastomer (TPC-ET), developed and manufactured by Sipol, with a nominal hardness of Shore D 61, a medium modulus, and a rheological behaviour, which makes it suitable for injection molding and extrusion processing.

Sipolprene® 63210 W is an ether ester thermoplastic elastomer (TPC-ET), developed and manufactured by Sipol, with a nominal hardness of Shore D 61, a medium modulus, and a rheological behaviour, which makes it suitable for injection molding and extrusion processing. Sipolprene® 63210 W comes in a dry blend UV-stabilised version.

Sipolprene® 63210 is an ether ester thermoplastic elastomer (TPC-ET), developed and manufactured by Sipol, with a nominal hardness of Shore D 61, a medium modulus, and a rheological behaviour, which makes it suitable for injection molding and extrusion processing. Sipolprene® 63210 comes in a natural color with a standard stabilisation package, fully in compliance with American FDA and European EU 10/2011 Food Contact Regulations. Black color and/or UV stabilised and/or heat stabilised are all available in dry blend version on request.

Sipolprene® 65215 is an ether ester thermoplastic elastomer (TPC-ET), developed and manufactured by Sipol, with a nominal hardness of Shore D 65 with a rheological behaviour, which makes it suitable for injection molding and extrusion processing. Sipolprene® 65215 comes in a natural color with a standard stabilisation package. Black color and/or UV stabilised and/or heat stabilised are all available in dry blend version on request.

Sipolprene® 72220 B (black color in dry blend) is an ether ester thermoplastic elastomer (TPC-ET), developed and manufactured by Sipol, with a nominal hardness of Shore D 72, a high modulus, and a rheological behaviour, which makes it suitable for injection molding and extrusion processing.

Sipolprene® 72220 W is an ether ester thermoplastic elastomer (TPC-ET), developed and manufactured by Sipol, with a nominal hardness of Shore D 72, a high modulus, and a rheological behaviour, which makes it suitable for injection molding and extrusion processing. Sipolprene® 72220 W comes in a dry blend UV-stabilised version.

Sipolprene® 72220 is an ether ester thermoplastic elastomer (TPC-ET), developed and manufactured by Sipol, with a nominal hardness of Shore D 72, a high modulus, and a rheological behaviour, which makes it suitable for injection molding and extrusion processing. Sipolprene® 72220 comes in a natural color with a standard stabilisation package, fully in compliance with American FDA and European EU 10/2011 Food Contact Regulations. Black color and/or UV stabilised and/or heat stabilised are all available in dry blend version on request.