AFFINITY* PL 1850G CIR Polyolefin Plastomer (POP) is produced via INSITE* Technology. It is designed to provide blown and cast film products with low temperature sealability, excellent optics and good abuse resistance. It has value as a sealant layer in multilayer film structures for dry and liquid packaging. - High performance sealant layer in flexible packaging - Excellent optics, low temperature seal initiation and abuse resistance Complies with: - U.S. FDA FCN 424 - EU, No 10/2011. - Complies with ISCC PLUS certification for circular plastics Consult the regulations for complete details.

- General purpose plastomer - Excellent impact properties in blends with polypropylene and polyethylene - Highly flexible with good elastic recovery - High clarity - Breathable (high O2 and CO2 transmission rates) - Low temperature sealability - Complies with U.S. FDA FCN 424 (See NOTES 1) - Consult the regulations for complete details. (See NOTES 2) AFFINITY* EG 8100G Polyolefin Plastomer (POP) is produced via INSITE* Technology. It is a general purpose ethylene-octene copolymer exhibiting high flexibility and elasticity. AFFINITY EG 8100G can be utilized in monolayer and coextruded films and in blends with other polyolefins to enhance clarity, sealability and toughness of the structure. Complies with: CANADIAN HPFB NO OBJECTION (WITH LIMITATIONS) - EU No 10/2011 - U.S. FDA FCN 424 Consult the regulations for complete details.

AFFINITY* EG 8200G Polyolefin Plastomer is produced via INSITE* Technology from Dow Plastics. This is an ethylene alpha-olefin copolymer exhibiting high flexibility and elasticity. It can be utilized in monolayer cast film and in blends with other polyolefins to enhance clarity, sealability and toughness of structure. - General purpose plastomer - Excellent impact properties in blends with polypropylene and polyethylene - Excellent flow characteristics - Highly flexible with good elastic recovery Complies with: - U.S. FDA FCN 424 - Canadian HPFP No Objection Consult the regulations for complete details.

Complies with: - EU, No 10/2011 - U.S. FDA 21 CFR 175.105(c)(5) - Consult the regulations for complete details.

- Ultra high clarity, low density, low viscosity polyolefin - Excellent thermal stability - Low Tg (Excellent low temperature properties) - Excellent flexibility - Non corrosive - Excellent color and odor - Excellent compatibility with a wide range of polymers - Low crystallinity (can be heavily filled) - Low density (better mileage) - Excellent adhesion to diverse substrates when formulated Complies with: - U.S. FDA FCN 424 Consult the regulations for complete details. AFFINITY* GA 1900 Polyolefin Plastomer (POP) is produced via INSITE* Technology from Dow Plastics. This product can be used in applications such as polymer modification (i.e. flow enhancement and property enhancement), masterbatch/additive carrier, and hot melt adhesives.

- Ultra high clarity, low density, low viscosity polyolefin - Excellent thermal stability - Low Tg (Excellent low temperature properties) - Excellent flexibility - Non corrosive - Excellent color and odor - Excellent compatibility with a wide range of polymers - Low crystallinity (can be heavily filled) - Low density (better mileage) - Excellent adhesion to diverse substrates when formulated AFFINITY™ GA 1900K Polyolefin Plastomer (POP) is produced via INSITE* Technology from Dow Plastics. This product can be used in applications such as polymer modification (i.e. flow enhancement and property enhancement), and masterbatch/additive carrier

- Ultra high clarity, low density, low viscosity polyolefin - Excellent thermal stability - Low Tg (Excellent low temperature properties) - Excellent flexibility - Non corrosive - Excellent color and odor - Excellent compatibility with a wide range of polymers - Low crystallinity (can be heavily filled) - Low density (better mileage) - Excellent adhesion to diverse substrates when formulated Complies with: - U.S. FDA FCN 424 Consult the regulations for complete details. AFFINITY* GA 1950 Polyolefin Plastomer (POP) is produced via INSITE* Technology from Dow Plastics. This product can be used in applications such as polymer modification (i.e. flow enhancement and property enhancement), masterbatch/additive carrier, and hot melt adhesives.

AFFINITY* HT1285G Polyolefin Plastomer (POP) is specifically designed as a high performance sealant for demanding packaging applications. AFFINITY HT 1285G provides high packaging integrity through improved hot tack strength, enhanced caulkability, superior seal though contamination, and low temperature seal initiation. It helps enable hermetic packaging on today's high speed packaging lines or with demanding substrates, and supports reducing sealant failure and potential related food waste. AFFINITY HT 1285G has been developed for processing on Cast, Blown, and Extrusion Coating film production lines. - High integrity sealant layer in flexible packaging - Low seal initiation temperature - Excellent hot tack strength - Excellent taste and odor profile - Superior seal through contamination Complies with: - U.S. FDA FCN 424 - EU, No 10/2011 Consult the regulations for complete details.

- Excellent inherent cling properties - Excellent optical properties - Excellent toughness properties Complies with: - U.S. FDA FCN 424 - Canadian HPFB No Objections Consult the regulations for complete details. AFFINITY* KC 8852G Polyolefin Plastomer (POP) is produced via INSITE* Technology. This resin is an ethyleneoctene copolymer that offers excellent performance as a cling resin in one-sided stretch cling film applications. This polyolefin plastomer provides excellent cling and optics, while offering outstanding toughness.

- High performance blown film resin for flexible packaging - Excellent abuse resistance - Low temperature seal initiation - Excellent optics - Outstanding high oxygen transmission rates Complies with: - U.S. FDA FCN 424 - Canadian HPFP No Objections - EU, No 10/2011 - U.S. FDA-DMF Consult the regulations for complete details. AFFINITY* PF 1140G Polyolefin Plastomer (POP) is produced via INSITE* Technology. It is an ethylene alpha-olefin resin designed to be used in a variety of demanding applications including form-fill-seal packaging and fresh produce bags. This resin has excellent compatibility with other polyolefins, allowing efficient blending and coextrusion.

AFFINITY* PF 1146 Polyolefin Plastomer (POP) is produced via INSITE* Technology. It is designed for high speed packaging applications requiring low seal initiation temperature and good machinability (low consistent coefficient of friction and low block force). This resin is designed to give a COF of < 0.2 for an ~1.0 mil sealant layer in a coextruded film, and to run fast and trouble-free on most extrusion equipment, including blown film dies equipped with narrow die gaps. - For use as a sealant layer in multilayer films - For fresh-cut produce, dry foods and other high speed VFFS (Vertical Form-Fill-Seal) applications Complies with: - U.S. FDA FCN 424 - EU, No 10/2011 Consult the regulations for complete details.

AFFINITY* PF 1146Q Polyolefin Plastomer (POP) is produced via INSITE* Technology. It is designed for high speed packaging applications requiring low seal initiation temperature and good machinability (low consistent coefficient of friction and low block force). This resin is designed to give a COF of < 0.2 for an ~1.0 mil sealant layer in a coextruded film, and to run fast and trouble-free on most extrusion equipment, including blown film dies equipped with narrow die gaps. - For use as a sealant layer in multilayer films - For fresh-cut produce, dry foods and other high speed VFFS (Vertical Form-Fill-Seal) applications Complies with: - U.S. FDA FCN 424 - EU, No 10/2011 - HPFB (Canada), No Objection Consult the regulations for complete details.

- For food packaging - Excellent seal flexibility and strength properties Complies with: - U.S. FDA FCN 424 Consult the regulations for complete details.

AFFINITY™ PF 1766 Polyolefin Elastomer is an ethylene based Plastomer that offers superior impact properties for more demanding stretch hood film applications. Main Characteristics: - Pellet form - Excellent processability Applications: - Extrusion applications

AFFINITY™ PF 1788 Polyolefin Plastomer (POP) is an ethylene-based plastomer, offers excellent processing in extrusion applications with enhanced elasticity performance targeting for TPE glove application. Main Characteristics - Pellet form - Excellent processability - Excellent elasticity Applications: - TPE glove Consult the regulations for complete details.

AFFINITY* PF 7266 Polyolefin Plastomer is an ethylene based plastomer, offers excellent processing and performance in extrusion applications targeting for CPP film modification application. Main Characteristics: - Pellet form - Excellent processability Applications: - Extrusion applications

AFFINITY™ PL 1280G Polyolefin Plastomer ist ein Polyolefin-Plastomer (POP), das mittels INSITE™-Technologie von Dow Plastics hergestellt wird. Es ist speziell auf den Einsatz als Dichtschicht in flexiblen Strukturen für Verpackungen von Fleisch und Käse, Trockenlebensmitteln und Gebrauchsgüter ausgelegt. Aufgrund seiner ausgezeichneten Siegelfähigkeit bei niedrigen Temperaturen, der ultimativen Warmnahtfestigkeit, seinen optischen Eigenschaften und der Widerstandsfähigkeit ist es insbesondere für hochschnelle Form-Füll-Siegel-Verpackungsmaschinen ausgelegt. Hinweis: Bei Verwendung in nicht modifizierter Form bei Anwendungen mit Lebensmittelkontakt erfüllt dieses Harz die Bestimmungen des Federal Food, Drug, and Cosmetic Act als Substanz für den Lebensmittelkontakt als Resultat einer vor der Vermarktung erworbenen FCN-424-Zulassung (FCN; Food Contact Notification) ab dem 07. Oktober 2004 gemäß FCN 424. Diese Zulassung genehmigt den Einsatz des Produkts als Artikel oder Komponente von Artikeln, die mit allen Lebensmitteln in Kontakt kommen, die unter die Nutzungsbestimmungen A bis H gemäß Tabelle 2 von 21 CFR § 176.170(c) der US-FDA fallen. EU, No 10/2011 Es liegt in der Verantwortung des Herstellers des Artikels mit Lebensmittelkontakt, sicherzustellen, dass der Artikel für den beabsichtigten Zweck geeignet ist. Hersteller sollten sich bewusst sein, dass Lebensmittel mit hohem Ölanteil die Unversehrtheit der Verpackung beeinträchtigen könnten. Wenden Sie sich an Ihr nächstgelegenes Dow-Büro in Bezug auf die Erklärungen zur Erfüllung der Vorschriften in Bezug auf Lebensmittelkontakt. Der Käufer ist verantwortlich für die Festlegung, ob der Einsatz die relevanten Vorschriften erfüllt. Anwendungen: Gießfolie

AFFINITY* PL 1840G Polyolefin Plastomer (POP) is produced via INSITE* Technology. It is an ethylene alpha-olefin resin designed to provide blown film with low temperature sealability, good puncture resistance, optics and organoleptic properties. It also has excellent compatibility with other polyolefins, allowing efficient blending and coextrusion. - Outstanding low temperature sealability and toughness - Suitable as a sealant in liquid & dry food pouch applications Applications: - Blown Film Complies with: - Canadian HPFP No Objection - EU, No 10/2011 - U.S. FDA FCN 424 - U.S. FDA-DMF Consult the regulations for complete details.

AFFINITY™ PL 1845G Polyolefin Plastomer ist ein Polyolefin-Plastomer (POP), das mittels INSITE™-Technologie von Dow Plastics hergestellt wird. Es ist speziell für den Einsatz als Dichtschicht in flexiblen Strukturen ausgelegt, die mittels Gießverfahren vorbereitet werden. Seine niedrige Heißsiegelinitiierungstemperatur, seine herausragenden optischen Eigenschaften und seine Coextrusionsfähigkeiten mit Polypropylenepolymeren machen AFFINITY PL 1845G Polyolefin Plastomer zum idealen Harz für den Einsatz als Kältesiegelrandschicht in coextrudierten biaxial gestreckten Polypropylenfolienstrukturen (BOPP). AFFINITY PL 1845G Polyolefin Plastomer enthält keine Gleit- oder Antiblock-Mittel. Zur Optimierung der Anwendungsleistung wird empfohlen, Gleit-/Antiblock-Masterbatches basierend auf Polyelfinplastomeren zuzugeben. Hinweis: Bei Verwendung in nicht modifizierter Form bei Anwendungen mit Lebensmittelkontakt erfüllt dieses Harz die Bestimmungen des Federal Food, Drug, and Cosmetic Act als Substanz für den Lebensmittelkontakt als Resultat einer vor der Vermarktung erworbenen FCN-424-Zulassung (FCN; Food Contact Notification) ab dem 07. Oktober 2004 gemäß FCN 424. Diese Zulassung genehmigt den Einsatz des Produkts als Artikel oder Komponente von Artikeln, die mit allen Lebensmitteln in Kontakt kommen, die unter die Nutzungsbestimmungen A bis H gemäß Tabelle 2 von 21 CFR § 176.170(c) der US-FDA fallen. Die Zusammensetzung dieses Produkt erfüllt die Anforderungen für den Einsatz bei EU, No 10/2011 Wenden Sie sich an Ihr nächstgelegenes Dow-Büro in Bezug auf die Erklärungen zur Erfüllung der Vorschriften in Bezug auf Lebensmittelkontakt. Der Käufer ist verantwortlich für die Festlegung, ob der Einsatz die relevanten Vorschriften erfüllt.

AFFINITY* PL 1850G Polyolefin Plastomer (POP) is produced via INSITE* Technology. It is designed to provide blown and cast film products with low temperature sealability, excellent optics and good abuse resistance. It has value as a sealant layer in multilayer film structures for dry and liquid packaging. - High performance sealant layer in flexible packaging - Excellent optics, low temperature seal initiation and abuse resistance Complies with: - U.S. FDA FCN 424 - Canadian HPFB No Objectin - EU, No 10/2011 Consult the regulations for complete details.

AFFINITY* PL 1880G R Polyolefin Plastomer (POP) is produced via INSITE* Technology. It is an ethylene alpha-olefin resin designed for use in a variety of demanding packaging applications, including high-speed, form-fill-seal packaging. This resin offers excellent ultimate hot tack strength and low temperature seal initiation, even through contamination in the package. - Low seal initiation temperature - Excellent hot tack strength - High performance sealant layer in flexible packaging Complies with: - U.S. FDA FCN 424 - U.S. FDA-DMF - U.S. USP 23 - HPFB No Objection (with limitations) - EU, No 10/2011 - Japan Hygienic Olefin and Styrene Plastics Association - ISCC Plus certification for renewable-based plastics Consult the regulations for complete details.

AFFINITY™ PL 1880G REN Polyolefin Plastomer (POP) is produced via INSITE* Technology. It is an ethylene alpha-olefin resin designed for use in a variety of demanding packaging applications, including high-speed, form-fill-seal packaging. This resin offers excellent ultimate hot tack strength and low temperature seal initiation, even through contamination in the package. - Low seal initiation temperature - Excellent hot tack strength - High performance sealant layer in flexible packaging Complies with: - U.S. FDA FCN 424 - U.S. FDA-DMF - U.S. USP 23 - HPFB No Objection (with limitations) - EU, No 10/2011 - Japan Hygienic Olefin and Styrene Plastics Association - ISCC Plus certification for bio-circular plastics Consult the regulations for complete details.

AFFINITY* PL 1880G Polyolefin Plastomer (POP) is produced via INSITE* Technology. It is an ethylene alpha-olefin resin designed for use in a variety of demanding packaging applications, including high-speed, form-fill-seal packaging. This resin offers excellent ultimate hot tack strength and low temperature seal initiation, even through contamination in the package. - Low seal initiation temperature - Excellent hot tack strength - High performance sealant layer in flexible packaging Complies with: - U.S. FDA FCN 424 - U.S. FDA-DMF - U.S. USP 23 - HPFB No Objection (with limitations) - EU, No 10/2011 - Japan Hygienic Olefin and Styrene lastics Association Consult the regulations for complete details.

AFFINITY* PL 1881G R Polyolefin Plastomer (POP) is produced via INSITE* Technology. It is designed for a variety of demanding packaging applications, including high-speed form-fill-seal products. - Excellent ultimate hot tack strength - Low temperature sealability - Ability to seal through contamination - Outstanding optics Complies with: - U.S. FDA FCN 424 - Canadian HPFB No Objection (with limitations) - EU, No 10/2011 - ISCC Plus certification for renewable-based plastics Consult the regulations for complete details.

AFFINITY™ PL 1881G REN Polyolefin Plastomer (POP) is produced via INSITE* Technology. It is designed for a variety of demanding packaging applications, including high-speed form-fill-seal products. - Excellent ultimate hot tack strength - Low temperature sealability - Ability to seal through contamination - Outstanding optics Complies with: - U.S. FDA FCN 424 - Canadian HPFB No Objection (with limitations) - EU, No 10/2011 - ISCC Plus certification for bio-circular plastics Consult the regulations for complete details.

AFFINITY* PL 1881G Polyolefin Plastomer (POP) is produced via INSITE* Technology. It is designed for a variety of demanding packaging applications, including high-speed form-fill-seal products. - Excellent ultimate hot tack strength - Low temperature sealability - Ability to seal through contamination - Outstanding optics Complies with: - U.S. FDA FCN 424 - Canadian HPFB No Objection (with limitations) - EU, No 10/2011 Consult the regulations for complete details.

AFFINITY* PL 1888G Polyolefin Plastomer for Packaging films is used for high speed packaging applications requiring low seal initiation temperature and good machinability (low consistent coefficient of friction and low block force). This resin is designed to give a COF of < 0.2 for an ~1.0 mil sealant layer in a coextruded film and run fast and trouble-free on most extrusion equipment, including blown film dies equipped with narrow die gaps. - For use in monolayer films and as the sealant layer in multilayer films - For fresh-cut produce, meat, cheese, and other high speed packaging applications requiring good machinability - Fast processing on narrow die gaps Complies with: - U.S. FDA FCN 424 - EU, No 10/2011 Consult the regulations for complete details.

- Monolayer and coextrusion coating for packaging applications - Recommended for use with Oriented Polypropylene (OPP as a tie layer or sealant) - Coextruded with acid copolymer as a cost effective foil or PET sealant - Complies with U.S. FDA - Consult the regulations for complete details. (See NOTES) AFFINITY™ PT 1450G1 Polyolefin Plastomer is produced via INSITE™ Technology. It is an ethylene alpha-olefin resin for monolayer and coextrusion coating that offers excellent low temperature seal initiation, ultimate seal strength, adhesion to (OPP) and good taste and odor performance. Note: It is the responsibility of the manufacturer of the food contact article to ensure the article is suitable for its intended use. Manufacturers should be aware that foods with a high oil content may compromise the integrity of the packaging.

- Monolayer and coextrusion coating for packaging applications - Recommended for use with Oriented Polypropylene (OPP as a tie layer or sealant) - Coextruded with acid copolymer as a cost effective foil or PET sealant - Complies with U.S. FDA - Consult the regulations for complete details. (See notes) AFFINITY PT 1450G1P Polyolefin Plastomer is produced via INSITE™ echnology. It is an ethylene alpha-olefin resin for monolayer and coextrusion coating that offers excellent low temperature seal initiation, ultimate seal strength, adhesion to OPP and good taste and odor performance. Note: It is the responsibility of the manufacturer of the food contact article to ensure the article is suitable for its intended use. Manufacturers should be aware that foods with a high oil content may compromise the integrity of the packaging.

AFFINITY™ PT 1451G1 Polyolefin Plastomer (POP) produced using INSITE™ Technology from Dow, is specifically designed for extrusion coating and other cast extrusion processing. AFFINITY PT 1451G1 Polyolefin Plastomer is a tough and high performance and low temperature sealant. Its ease of processability in combination with other common extrusion coating polyolefins, i.e. LDPE or acid copolymers, provides optimum sensory performance. The high clarity and adhesion to PP makes coatings of AFFINITY PT 1451G1 Polyolefin Plastomer fit for use in combination with OPP or primed PET high clarity films. Coextrusions of AFFINITY PT 1451G1 Polyolefin Plastomer with acid copolymers for adhesion to foil offer cost effective high performance sealant structures with exceptional potential for source reduction. Note: AFFINITY PT 1451G1 Polyolefin Plastomer should comply with FDA regulation 21 CFR 177.1520 (c) 3.2c and with most European food contact regulations when used unmodified and processed according to good manufacturing practices for food contact applications. Please contact your nearest Dow office regarding food contact compliance statements. The purchaser remains responsible for determining whether the use complies with all relevant regulations. Applications: Flexible packaging

AFFINITY™ SL 8110G Polyolefin Plastomer wird mittels INSITE™-Technologie hergestellt. AFFINITY SL 8110G Polyolefin Plastomer wurde für Blasstreckfolien als Randschicht in der Coextrusion mit anderen Harzen ausgelegt. Es weist ausgezeichnete Dehnbarkeit und Hafteigenschaften sowie gute physikalische Eigenschaften auf. Aufgrund seines niedrigen Schmelzpunkts ist AFFINITY SL 8110G für Anwendungen im Bereich von Batch-Inclusion-Tüten geeignet. Bei Verwendung in nicht modifizierter Form bei Anwendungen mit Lebensmittelkontakt erfüllt dieses Harz die Bestimmungen des Federal Food, Drug, and Cosmetic Act als Substanz für den Lebensmittelkontakt als Resultat einer vor der Vermarktung erworbenen FCN-Zulassung (FCN; Food Contact Notification) ab dem 07. Oktober 2004 gemäß FCN 424. Diese Zulassung genehmigt den Einsatz des Produkts als Artikel oder Komponente von Artikeln, die mit allen Lebensmitteln in Kontakt kommen, die unter die Nutzungsbestimmungen A bis H gemäß Tabelle 2 von 21 CFR § 176.170(c) der US-FDA fallen. Die Zusammensetzung dieses Produkts erfüllt die Anforderungen der meisten europäischen Vorschriften für den Lebensmittelkontakt, die sich auf den Kontakt mit nicht fetthaltigen Lebensmitteln beziehen. Wenden Sie sich an Ihr nächstgelegenes Dow-Büro in Bezug auf die Erklärungen zur Erfüllung der Vorschriften in Bezug auf Lebensmittelkontakt. Der Käufer ist verantwortlich für die Festlegung, ob der Einsatz die relevanten Vorschriften erfüllt. Anwendungen: - Haftvermittler in Blasstreckfolien und vorgestreckten Folien. - Batch-Inclusion-Tüten.

AFFINITY™ SQ 1503 UE Polyolefin Plastomer ist ein Polyolefin Plastomer (POP), hergestellt unter Verwendung der INSITE™ Technologie. AFFINITY SQ 1503 UE Polyolefin Plastomer wurde speziell für Rotationsgussanwendungen entwickelt. Es bietet leichtes Entformen kombiniert mit Flexibilität und Elastizitätsrückgewinnung, wie man sie normalerweise von polaren Copolymeren kennt, wie EBA, EVA und plastifiziertem PVC. Verarbeitung und Stabilisierung: Das an sich schon stabile POP ist darüber hinaus hitzebeständig und vor UV-Strahlung geschützt. Das Ergebnis sind große Verarbeitungsbreite, gute Farbstabilität und lange Lebensdauer. Verfügbarkeit: AFFINITY SQ 1503 UE Polyolefin Plastomer gibt es als freifließendes Pulver in einer Körnung von 500 Micron. Anwendungen: - Bojen - Fender - Straßenausstattung Entspricht: - EU, Nr. 10/2011 - U.S. FDA FCN 424 Umfassende Informationen finden Sie in den Bestimmungen.

AFFINITY™ VP 8770G1 Polyolefin Plastomer ist ein Polyolefin-Plastomer (POP), das mittels INSITE™-Technologie hergestellt wird. AFFINITY VP 8770G1 Polyolefin Plastomer verfügt über eine außergewöhnlich hohe Klarheit und Flexibilität. Es wurde auf Kalandrierungsanwendungen ausgelegt, aber ist auch für dickere Extrusion und Profilextrusion geeignet. Die Kompatibilität mit anderen Polyolefinen und Füllstoffen ist ausgezeichnet. Hinweis: Bei Verwendung in nicht modifizierter Form bei Anwendungen mit Lebensmittelkontakt erfüllt dieses Harz die Bestimmungen des Federal Food, Drug, and Cosmetic Act als Substanz für den Lebensmittelkontakt als Resultat einer vor der Vermarktung erworbenen FCN-424-Zulassung (FCN; Food Contact Notification) ab dem 07. Oktober 2004 gemäß FCN 424. Diese Zulassung genehmigt den Einsatz des Produkts als Artikel oder Komponente von Artikeln, die mit allen Lebensmitteln in Kontakt kommen, die unter die Nutzungsbestimmungen A bis H gemäß Tabelle 2 von 21 CFR § 176.170(c) der US-FDA fallen. - EU, No 10/2011 Wenden Sie sich an Ihr nächstgelegenes Dow-Büro in Bezug auf die Erklärungen zur Erfüllung der Vorschriften in Bezug auf Lebensmittelkontakt. Der Käufer ist verantwortlich für die Festlegung, ob der Einsatz die relevanten Vorschriften erfüllt. Anwendungen: - Kalandrierte oder gepresste Bodenbeläge mit mäßigen Füllstoffniveaus. - Kalandrierte Folie und Platten. - Profilextrusion.

COHERE™ Metallocene Polyolefin Plastomer (POP) 8102 is an ethylene-octene copolymers produced via solution polymerization using metallocene catalyst. It performs well in high performance LLDPE blown film applications with an excellent combination of toughness, hot tack, sealing and optical properties.

COHERE™ Metallocene Polyolefin Plastomer (POP) 8102L is an ethylene-octene copolymers produced via solution polymerization using metallocene catalyst. It performs well in high performance LLDPE blown film applications with an excellent combination of toughness, hot tack, sealing and optical properties. It contains slip and antiblock additives.

COHERE™ Metallocene Polyolefin Plastomer (POP) 8170D is an ethylene-octene copolymer produced via solution polymerization using metallocene catalyst. It can be used in monolayer or coextruded film to enhance heat-sealing properties, clarity, toughness, flexibility and elasticity. It has strict gel control to meet high quality film requirements.

COHERE™ Metallocene Polyolefin Plastomer (POP) 8185 is an ethylene-octene copolymer produced via solution polymerization using metallocene catalyst. It performs well in high performance film applications with outstanding gel control, and an excellent combination of toughness, hot tack, sealing and optical properties.

COHERE™ Metallocene Polyolefin Plastomer (POP) 8380 is an ethylene-octene copolymer produced via solution polymerization using metallocene catalyst. It can be used in monolayer or coextruded film to enhance heat-sealing properties, clarity, toughness, flexibility and elasticity. It has strict gel control to meet high quality film requirements.

COHERE™ Metallocene Polyolefin Plastomer (POP) 8402 grade is an ethylene-octene copolymer produced via solution polymerization using metallocene catalyst. It performs well high performance LLDPE cast film and deliver outstanding toughness optics. SABIC® COHERE™ 8402 provides excellent performance as cling layer in stretch wrap film.

COHERE™ Metallocene Polyolefin Plastomer (POP) 8570D is an ethylene-octene copolymer produced via solution polymerization using metallocene catalyst. It can be used in monolayer or coextruded film to enhance heat-sealing properties, clarity, toughness, flexibility and elasticity. It has strict gel control to meet high quality film requirements.