Ultrason E 1010 is an unreinforced, low viscosity injection molding PESU grade. It flows readily and offers outstanding heat resistance and dimensional stability. Applications Typical applications include automotive applications such as fuse encapsulation, connectors, heating system and headlight components and household applications such as microwave dishes and other applications requiring high heat resistance.

Medium viscosity injection moulding grade with high rigidity and strength, 30 % carbon fiber reinforced.

Ultrason® pellets are supplied in bags and/or octabins. The bulk density ranges between 700 and 800 g/l. Provided the packaging remains undamaged, Ultrason® can be stored indefinitely. Ultrason® pellets absorb moisture very rapidly. Therefore, the pellets need to be dried at least 4h at 130°C to 150°C in a vacuum or dry air drier prior to processing.

Ultrason E 2010 G4 is a 20% glass reinforced, medium viscosity injection molding PESU grade with high rigidity and strength. Applications Typical applications include circuit braker parts, lamp holders, heat shields, impellers, and printer cartridges.

Ultrason E 2010 G6 is a 30% glass reinforced, medium viscosity injection molding PESU grade with high rigidity and strength. Applications Typical applications include circuit braker parts, lamp holders, heat shields, impellers, and printer cartridges.

Special unreinforced, medium viscosity injection moulding grade for applications demanding inherent color, transparency and free from specks.

Unreinforced, medium viscosity standard injection moulding grade, demolding optimized.

Ultrason E 2010 MR is an unreinforced, medium viscosity standard injection molding PESU grade. The material flows readily and offers outstanding heat resistance and dimensional stability.

Ultrason E 2010 is an unreinforced, medium viscosity standard injection molding PESU grade. Ultrason E 2010 Natural flows readily and offers outstanding heat resistance and dimensional stability. Applications Typical applications include automotive applications such as fuse encapsulation, connectors, heating system and headlight components and household applications such as microwave dishes and other applications requiring high heat resistance.

Fine Polyethersulfone powder, e.g. for membrane applications, coatings and resin modification, containing min. 50% of OH-endgroups. The product has a typical particle size below 100 µm and is soluble in N-methyl-pyrrolidone (NMP) and N,N-Dimethylacetamide (DMAc). This grade is not suitable for thermoplastic moulding / extrusion.

Polyethersulfone flakes, e.g. for membrane applications, coatings and resin modification, containing min. 50% of OH-endgroups. The product is soluble in N-methyl-pyrrolidone (NMP) and N,N-Dimethylacetamide (DMAc). This type is not suitable for thermoplastic moulding.

Ultrason E 2020 P is polyethersulphone flakes for solvent based processes. The product is soluble in N-Methylpyrrolidone and N,N-Dimethylacetamide. Applications Typical applications include membrane applications and coatings.

Unreinforced, higher viscosity injection molding and extrusion grade with improved toughness and chemical resistance (stress crack resistance); demolding optimized

Ultrason E 3010 MR is an unreinforced, higher viscosity injection molding and extrusion PESU grade with improved toughness and chemical resistance (stress crack resistance).

Ultrason E 3010 is an unfilled, higher viscosity injection molding and extrusion PESU grade, tougher and with improved chemical resistance.

Ultrason E 6020 P is an unfilled, injection molding PESU grade. Applications Typical applications include membrane applications and coatings.

Polyethersulfone flakes, e.g. for membrane applications and coatings.

Medium viscosity injection moulding grade with high rigidity and strength, 45 % glass fiber reinforced.

Compound based on PES with 30 % filler. The filler system, a mixture of carbon fibres, graphite and PTFE powder, considerably improves Ultrason tribological properties. In addition, this product has a very small expansion coefficient and low tendency to swell in hot oils.

Ultrason P 2010 is an unreinforced, medium viscosity injection molding PPSU grade

Unreinforced, medium viscosity injection moulding grade, flameretardent and with improved chemical resistance.This grade is black colored and demolding optimized.

Unreinforced, medium viscosity injection moulding grade, flameretardent and with improved chemical resistance.

Ultrason P 3010 is an unreinforced, flame retardant, higher viscosity injection molding PPSU grade, with improved chemical resistance.

Ultrason S 2010 G4 is a 20% glass reinforced, medium viscosity injection molding PSU grade with high rigidity and strength. Applications Typical applications include circuit braker parts, lamp holders, heat shields, impellers, and printer cartridges.

Ultrason S 2010 G6 is a 30% glass reinforced, medium viscosity injection molding PSU grade with high rigidity and strength. Applications Typical applications include circuit braker parts, lamp holders, heat shields, impellers, and printer cartridges.

Ultrason S 2010 is an unreinforced, medium viscosity standard injection molding PSU grade. It flows readily and offers outstanding heat resistance and dimensional stability. Typical applications include automotive applications such as fuse encapsulation, connectors, heating system and headlight components and household applications requiring high heat resistance.

Unreinforced, higher viscosity injection moulding and extrusion grade, tougher, with improved chemical resistance and demolding optimized.

Ultrason S 3010 MR is an unreinforced higher viscosity injection molding grade with improved toughness and chemical resistance (stress crack resistance).

Ultrason S 3010 is medium viscosity injection molding grade with improved toughness and chemical resistance (stress crack resistance). Applications Typical applications include laboratory accessories and household parts.

Ultrason S 6010 is a high molecular weight injection molding and extrusion grade with excellent chemical resistance (stress crack resistance) and good solubility in typical solvents (N-methylpyrrolidone, dimethlyacetamide, dicholormethane) used in the production of membranes or coatings. Applications Typical applications include sanitary and heating systems/parts and membranes.