DAI-EL G-551 is a fluoroelastomer with a good balance of fluid resistance and low temperature flexibility. Introduction - DAI-EL G-551 is a bisphenol type cure-incorporated terpolymer of vinylidene fluoride, tetrafluoroethylene and hexafluoropropylene which is suitable for compression molding. - It offers a good balance of fluid resistance and low temperature flexibility.

DAI-EL G-555 is a fluoroelastomer which has excellent extrusion processability with a good balance of fuel resistance and low temperature flexibility. - DAI-EL G-555 is a bisphenol type cure-incorporated terpolymer of vinylidene fluoride, tetrafluoroethylene and hexafluoropropylene which has excellent extrusion processability. - It offers a good balance of fuel resistance and low temperature flexibility and is suitable for fuel hoses.

DAI-EL G-557 is a fluoroelastomer which has excellent extrusion processability with excellent fuel resistance. - DAI-EL G-557 is a bisphenol type cure-incorporated terpolymer of vinylidene fluoride, tetrafluoroethylene and hexafluoropropylene which has excellent extrusion processability. - It offers excellent fuel resistance and is suitable for fuel hoses.

DAI-EL G-558 is a fluoroelastomer which has excellent extrusion processability with excellent fuel resistance. - DAI-EL G-558 is a bisphenol type cure-incorporated terpolymer of vinylidene fluoride, tetrafluoroethylene and hexafluoropropylene which has excellent extrusion processability. - It offers excellent fuel resistance and is suitable for fuel hoses.

DAI-EL G-565 is a fluoroelastomer which has excellent extrusion processability with excellent fuel resistance. - DAI-EL G-565 is a bisphenol type cure-incorporated terpolymer of vinylidene fluoride, tetrafluoroethylene and hexafluoropropylene which has excellent extrusion processability. - It offers excellent fuel resistance and is suitable for fuel hoses.

DAI-EL G-572BP is a fluoroelastomer which has excellent injection moldability with good chemical resistance and compression set. Introduction - DAI-EL G-572BP is a bisphenol curable terpolymer of vinylidene fluoride, tetrafluoroethylene and hexafluoropropylene which has excellent injection moldability. - It offers good chemical resistance and compression set. - It does not contain curing agent and accelerator.

DAI-EL G-576BP is a fluoroelastomer which has excellent injection moldability with good chemical resistance and compression set. Introduction - DAI-EL G-576BP is a bisphenol curable terpolymer of vinylidene fluoride, tetrafluoroethylene and hexafluoropropylene which has excellent injection moldability. - It offers good chemical resistance and compression set. - It does not contain curing agent and accelerator.

DAI-EL G-603 is a fluoroelastomer which provides excellent fluid resistance and very low fuel permeation rates. - DAI-EL G-603 is a bisphenol type cure-incorporated terpolymer of vinylidene fluoride, tetrafluoroethylene and hexafluoropropylene which is suitable for transfer and compression molding. - It has highest fluorine content of all grades, which provides excellent fluid resistance and very low fuel permeation rates.

DAI-EL G-607BP is a fluoroelastomer which offers superior low temperature flexibility. - DAI-EL G-607BP is a bisphenol curable terpolymer of vinylidene fluoride, tetrafluoroethylene and hexafluoropropylene. - It offers superior low temperature flexibility compared with copolymers of similar fluorine content. - Use it for adjustment of cure density by mixing with other bisphenol curable products. It does not contain vulcanization agent and accelerator.

DAI-EL G-621 is a fluoroelastomer which provides excellent fluid resistance and very low fuel permeation rates. - DAI-EL G-621 is a bisphenol type cure-incorporated terpolymer of vinylidene fluoride, tetrafluoroethylene and hexafluoropropylene which is suitable for compression molding. - It has highest fluorine content of all grades, which provides excellent fluid resistance and very low fuel permeation rates.

DAI-EL G-663BP is a fluoroelastomer which has excellent injection moldability with superior low temperature flexibility. - DAI-EL G-663BP is a bisphenol curable terpolymer of vinylidene fluoride, tetrafluoroethylene and hexafluoropropylene which has excellent injection moldability. - It offers superior low temperature flexibility compared with copolymers of similar fluorine content. - It does not contain curing agent and accelerator.

DAI-EL G-671 is a fluoroelastomer which is excellent in low temperature flexibility. - DAI-EL G-671 is a bisphenol type cure-incorporated terpolymer of vinylidene fluoride, tetrafluoroethylene and hexafluoropropylene which is suitable for transfer and compression molding. - It is the best in low temperature flexibility among bisphenol curable fluoroelastomers.

DAI-EL G-684BP is a fluoroelastomer which has excellent injection moldability with excellent chemical resistance and good compression set. - DAI-EL G-684BP is a bisphenol curable terpolymer of vinylidene fluoride, tetrafluoroethylene and hexafluoropropylene which has excellent injection moldability. - It offers excellent chemical resistance and good compression set. - It does not contain curing agent and accelerator.

DAI-EL G-8002 is a fluoroelastomer which provides superior mechanical properties and resistance to steam and acids. - DAI-EL G-8002 is a peroxide curable copolymer of vinylidene fluoride and hexafluoropropylene which is suitable for injection and extrusion molding. - It provides superior mechanical properties and resistance to steam and acids compared with bisphenol curable products.

DAI-EL G-8002L is a fluoroelastomer which provides excellent mold flow with superior chemical resistance. - DAI-EL G-8002L is a peroxide curable copolymer of vinylidene fluoride and hexafluoropropylene which provides excellent mold flow. It is suitable for extrusion and injection molding. - It provides superior chemical resistance compared with bisphenol curable products.

DAI-EL G-801 is a fluoroelastomer which provides superior mechanical properties and resistance to steam and acids. - DAI-EL G-801 is a peroxide curable copolymer of vinylidene fluoride and hexafluoropropylene which is suitable for transfer and compression molding. - It provides superior mechanical properties and resistance to steam and acids compared with bisphenol curable products.

DAI-EL G-802 is a fluoroelastomer which provides superior mechanical properties and resistance to steam and acids. - DAI-EL G-802 is a peroxide curable copolymer of vinylidene fluoride and hexafluoropropylene which is suitable for injection, transfer and extrusion molding. - It provides superior mechanical properties and resistance to steam and acids compared with bisphenol curable products.

DAI-EL G-901 is a fluoroelastomer which provides excellent mechanical properties and resistance to steam and acids. - DAI-EL G-901 is a peroxide curable terpolymer of vinylidene fluoride, tetrafluoroethylene and hexafluoropropylene which is suitable for transfer and compression molding. - It provides excellent mechanical properties and resistance to steam and acids. It has highest fluorine content of all grades, which provides excellent chemical resistance.

DAI-EL G-902 is a fluoroelastomer which provides excellent mechanical properties and resistance to steam and acids. - DAI-EL G-902 is a peroxide curable terpolymer of vinylidene fluoride, tetrafluoroethylene and hexafluoropropylene which is suitable for injection, transfer and extrusion molding. - It provides excellent mechanical properties and resistance to steam and acids. It has highest fluorine content of all grades, which provides excellent chemical resistance.

DAI-EL G-9062 is a fluoroelastomer which provides excellent compression set and resistance to steam and acids. Introduction - DAI-EL G-9062 is a peroxide curable terpolymer of vinylidene fluoride, tetrafluoroethylene and hexafluoropropylene which has excellent mold flow. It is suitable for injection molding. - It provides excellent compression set and resistance to steam and acids. It has highest fluorine content of all grades, which provides excellent chemical resistance.

DAI-EL G-9074 is a fluoroelastomer which provides excellent compression set and resistance to steam and acids. - DAI-EL G-9074 is a peroxide curable terpolymer of vinylidene fluoride, tetrafluoroethylene and hexafluoropropylene which has excellent mold flow. It is suitable for injection molding. - It provides excellent compression set and resistance to steam and acids. It has highest fluorine content of all grades, which provides excellent chemical resistance.

DAI-EL G-912 is a fluoroelastomer which provides excellent resistance to steam and acids and good compression set. - DAI-EL G-912 is a peroxide curable terpolymer of vinylidene fluoride, tetrafluoroethylene and hexafluoropropylene which is suitable for injection, transfer and extrusion molding. - It provides excellent resistance to steam and acids and good compression set. It has highest fluorine content of all grades, which provides excellent chemical resistance.

DAI-EL G-9503 is a fluoroelastomer which provides excellent mechanical properties and resistance to steam and acids. - DAI-EL G-9503 is a peroxide curable terpolymer of vinylidene fluoride, tetrafluoroethylene and hexafluoropropylene which is suitable for injection molding. - It provides excellent mechanical properties and resistance to steam and acids and a good balance of chemical resistance and low temperature flexibility.

DAI-EL G-952 is a fluoroelastomer which provides excellent mechanical properties and resistance to steam and acids. - DAI-EL G-952 is a peroxide curable terpolymer of vinylidene fluoride, tetrafluoroethylene and hexafluoropropylene which is suitable for transfer and compression molding. - It provides excellent mechanical properties and resistance to steam and acids and a good balance of chemical resistance and low temperature flexibility.

DAI-EL G-962 is a fluoroelastomer which provides excellent mechanical properties and resistance to steam and acids with good low temperature flexibility. Introduction - DAI-EL G-962 is a peroxide curable terpolymer of vinylidene fluoride, tetrafluoroethylene and hexafluoropropylene which is suitable for injection molding. - It provides excellent mechanical properties and resistance to steam and acids and a good balance of chemical resistance and low temperature flexibility.

DAI-EL G-964 is a fluoroelastomer which provides excellent mechanical properties and resistance to steam and acids with good low temperature flexibility. - DAI-EL G-964 is a peroxide curable terpolymer of vinylidene fluoride, tetrafluoroethylene and hexafluoropropylene which is suitable for transfer and compression molding. - It provides excellent mechanical properties and resistance to steam and acids and a good balance of chemical resistance and low temperature flexibility.

DAI-EL GBR-6002 is a fluoroelastomer which provides excellent resistance to amines and bases with good processability, compression set and resistance to steam and acids. Introduction - DAI-EL GBR-6002 is a peroxide curable copolymer of vinylidene fluoride and 2,3,3,3-tetrafluoro-propylene, which provides excellent resistance to amines and bases such as engine coolants, lubricating oils, some oil & gas drilling fluids and other high pH environments. - It offers superior processability, compression set and resistance to steam and acids compared with other base resistant fluoroelastomers.

DAI-EL GBR-6005 is a fluoroelastomer which provides excellent resistance to amines and bases with good processability, compression set and resistance to steam and acids. Introduction - DAI-EL GBR-6005 is a peroxide curable copolymer of vinylidene fluoride and 2,3,3,3-tetrafluoro- propylene, which provides excellent resistance to amines and bases such as engine coolants, lubricating oils, some oil & gas drilling fluids and other high pH environments. - It offers superior processability, compression set and resistance to steam and acids compared with other base resistant fluoroelastomers.

NEOFLON CPT LP-1000 is a new type of fluoropolymer that has excellent permeation for organic solvent, water vapor and gasoline. Introduction - NEOFLON CPT LP-1000 is a copolymer of tetrafluoroethylene and perfluoroalkyl vinyl ether in which main chain the third monomer added. - Hot melt adhesion to the other plastics such as Polyamide with its reactive group. - Adhere directly to rubber such as NBR, ECO by cross linking during the vulcanization. - Good flexibility and excellent permeation for organic solvent, water vapor and gasoline. - It can be melt-molded as a thermoplastic resin by extrusion molding, injection molding, compression molding and the like.

NEOFLON CPT LP-1000AS is a new type of conductive fluoropolymer that has excellent permeation for organic solvent, water vapor and gasoline. Introduction - NEOFLON CPT LP-1000AS is a copolymer of tetrafluoroethylene and perfluoroalkyl vinyl ether in which main chain the third monomer added. - It is conductive. - Hot melt adhesion to the other plastics such as Polyamide with its reactive group. - Adhere directly to rubber such as NBR, ECO by cross linking during the vulcanization. - Good flexibility and excellent permeation for organic solvent, water vapor and gasoline. - It can be melt-molded as a thermoplastic resin by extrusion molding, injection molding, compression molding and the like.

NEOFLON EFEP RP4020 is a fluoropolymer that has chemical resistance and the capability to adhere to the other materials. Introduction - NEOFLON EFEP RP-4020 which owns low melting point is a copolymer of ETFE and additional third monomer. - Due to its low melting point, a laminated product such as a multi-layer tube and film with EVOH can be obtained by co-extrusion molding. - Hot melt adhesion to the other plastics such as Polyamide with its reactive group. - Excellent process ability and high transparency. - It can be melt-molded as a thermoplastic resin by extrusion molding, injection molding, compression molding and the like.

NEOFLON EFEP RP5000 is a fluoropolymer that has chemical resistance and the capability to adhere to the other materials. It has a good chemical resistance as ETFE at the same time. Introduction - NEOFLON EFEP RP-5000 which owns low melting point is a copolymer of ETFE and additional third monomer. - Due to its low melting point, a laminated product such as a multi-layer tube and film with EVOH can be obtained by co-extrusion molding. - Hot melt adhesion to the other plastics such as Polyamide with its reactive group. - Excellent process ability and the good chemical resistance as ETFE. - It can be melt-molded as a thermoplastic resin by extrusion molding, injection molding, compression molding and the like.

NEOFLON EFEP RP5000AS is a conductive fluoropolymer that can adhere to the other materials. It has a good chemical resistance as ETFE at the same time. Introduction - NEOFLON EFEP RP-5000AS which owns low melting point is a copolymer of ETFE and additional third monomer. It is conductive - Due to its low melting point, a laminated product such as a multi-layer tube and film with EVOH can be obtained by co-extrusion molding. - Hot melt adhesion to the other plastics such as Polyamide with its reactive group. - Excellent process ability and the good chemical resistance as ETFE. - It can be melt-molded as a thermoplastic resin by extrusion molding, injection molding, compression molding and the like.

NEOFLON ETFE EP-521 is a fluoropolymer with good mechanical properties and relatively low specific gravity. Introduction - NEOFLON ETFE EP-521 is a copolymer of tetrafluoroethylene and ethylene, which is chemically stable and electrically unique. It's also well designed low specific gravity. - Good mechanical properties, good processability and good radiation resistance. Owing to the feature of ethylene (comonomer). - Good melt flowability. It is suitable for both extrusion and injection molding. - It is widely used such as for wire and cable (aerospace, automotive and appliance), film, electrical parts and semiconductor containers.

NEOFLON ETFE EP-541 is a low-specific-gravity fluoropolymer with stronger mechanical properties. Introduction - NEOFLON ETFE EP-541 is a copolymer of tetrafluoroethylene and ethylene, which is chemically stable and electrically unique. It's also well designed low specific gravity. - Good mechanical properties, good processability and good radiation resistance. Owing to the feature of ethylene (comonomer). - It is suitable for both extrusion and injection molding. - It is used for wire and cable (aerospace, automotive and appliance), film, electrical parts and semiconductor containers which require crack resistance.

NEOFLON ETFE EP-610 is a fluoropolymer with good flexibility and processability. Introduction - NEOFLON ETFE EP-610 is a copolymer of tetrafluoroethylene and ethylene, which is chemically stable and electrically unique. It's also well-designed flexible. - Good mechanical properties, good processability and good radiation resistance. Owing to the feature of ethylene (comonomer). - Low melting point. It can be processed with wide temperature range of extrusion and injection molding. - It is widely used for wire and cable (aerospace, automotive and appliance), film, electrical parts and semiconductor containers.

NEOFLON EP-610AS is a fluoropolymer with conductive property. Introduction - NEOFLON EP-610AS is a copolymer of tetrafluoroethylene and ethylene incorporating conductivity, which is chemically stable and electrically unique. - Good mechanical properties, good processability and good radiation resistance. Owing to the feature of ethylene (comonomer). - Low specific gravity. - Good for both extrusion and injection molding due to its good melt flowability.

NEOFLON ETFE EP-620 is a fluoropolymer with good flexibility and mechanical properties. Introduction - NEOFLON ETFE EP-620 is a copolymer of tetrafluoroethylene and ethylene, which is chemically stable and electrically unique. It's also well-designed flexible. - Good mechanical properties, good processability and good radiation resistance. Owing to the feature of ethylene (comonomer). - Low melting point. It can be processed with wide temperature range of extrusion and injection molding. - It is widely used for wire and cable (aerospace, automotive and appliance), film, electrical parts and semiconductor containers.

NEOFLON EP-610AS is a fluoropolymer with conductive property. Introduction - NEOFLON EP-620AS is a copolymer of tetrafluoroethylene and ethylene incorporating conductivity, which is chemically stable and electrically unique. - Good mechanical properties, good processability and good radiation resistance. Owing to the feature of ethylene (comonomer). - Low specific gravity. - Good for both extrusion and injection molding due to its good melt flowability.

NEOFLON EP-7000 is a coextrudable fluoropolymer with good adhesion to other polymers and permeation resistance. Introduction - NEOFLON EP-7000 is a copolymer of tetrafluoroethylene and ethylene which are designed to automotive industry. It is chemically stable and electrically unique. - Good permeation resistance for gasoline and flexible-fuel. - Good adhesion with many kinds of plastics without adhesive or etching reagent. - Easy coextrusion. Suitable for multilayer tubing, etc. - Good mechanical properties, good processability and good radiation resistance. Owing to the feature of ethylene (comonomer). - Flexible and well designed fluoropolymer.